Argyll and Bute · Scotland

uPVC window & door repair in Strachur, Argyll and Bute

uPVC repair in Strachur without the cost of replacing. Send us pictures for a fixed quote, then we come to you.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Damage during building work
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair in Strachur

How the visit works

You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It generally takes a morning or an afternoon, and you can get on with other things while we are there.

  1. We start by cleaning the frame.
  2. We fill scratches, chips and holes.
  3. We sand the repair smooth.
  4. We match the colour, including woodgrain finishes.
  5. Finally we blend it into the rest of the frame.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Point us to the nearest place to park
  • Ensure the area is dry

Ask for a price

For a price in Strachur, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Advice

About our uPVC repair in Strachur

We also do snagging repairs for builders. The damage is filled and refinished so it blends into the frame, including woodgrain finishes. If you are dealing with holes from removed fittings and alarms and damage during building work, we can help, on doors & door panels, white uPVC and window frames & sills alike.

You get a one-year guarantee, the same in Strachur as everywhere else we work. Warm soapy water and a soft cloth are all it needs. Do not use solvents or scourers.

Location
Strachur (PA27)
County
Argyll and Bute
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a chipped white edge filled and refinished

FAQs for Strachur

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Can a burnt window sill be fixed?

Yes. The burn is filled and refinished to match.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Can I get a quote without a visit?

In nearly every case. If photos do not show enough, we’ll ask for another angle.

What does uPVC repair cost?

Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

What areas do you cover?

The entire UK, including all of Argyll and Bute. Send your postcode with your pictures and we’ll offer you dates.

What happens once I’ve sent pictures?

You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

About Strachur

Strachur is about 17 miles north-west of Helensburgh, in Argyll and Bute. We visit homes and businesses in Strachur and nearby villages, so there is no workshop to go to. We cover 118 places across Argyll and Bute, from the larger towns to small villages. You can also see our page for Glasgow, about 37 miles away.

We cover every part of PA27 and the streets around it. Jobs here include addresses on Montgomery Place, Manse Gardens and Forest View. If you’re just outside Strachur, we cover Inbhir Aora (4 miles north), Inveraray (4 miles north), Lochgoilhead (6 miles east), Cairndow (8 miles north-east) and Minard (8 miles south-west). Further out, we also cover Rhu (15 miles south-east), Garelochhead (11 miles south-east) and Sandbank (14 miles south). Some remote addresses need extra planning, so it’s best to call first.

Near you in Strachur

Locally, our jobs take us to homes close to Kilmaglash Parish Church and Sculptured Stones. Further afield, we also cover the area around Strachur Smiddy Museum (less than half a mile north-west).

Map of Strachur © OpenStreetMap contributors

Do you need uPVC repair in Strachur?

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes mark sills, and old fittings leave holes.

You may need us if you’ve spotted any of these:

  • Scratches from ladders and furniture
  • Burns on sills
  • Chips and dents
  • Damage during building work

What to look for in a quote

  • What protection goes down before work starts
  • What the guarantee covers, and for how long
  • Aftercare advice
  • How the colour is matched

Our hiring checklist

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Should you replace it?

A new window, door or sill is a much bigger job, and new uPVC may not match the weathered frames around it. Repairing the damage keeps the original. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why Strachur customers choose us

  • CHAS, Constructionline and SafeContractor accredited
  • We come to you, anywhere in the UK
  • We leave the room as we found it
  • One-year guarantee on every repair

Read our prices page.

How we price uPVC repair

Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:

  • What kind of damage it is
  • How many areas need work
  • Whether old repairs or coatings need taking off
  • Unusual colours or finishes

A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from pictures

We price nearly every job from pictures. This is what we need:

  • Daylight if possible, and no flash reflection
  • One picture of the whole window, door or sill
  • A clear, close picture of the problem area
  • The material, if you know it

To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.

Work for landlords and builders

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Send us photos and we will tell you honestly before you book.

Materials we repair

  • Coloured and woodgrain uPVC
  • Conservatory frames
  • Doors & door panels
  • White uPVC
  • Window frames & sills
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.