South Lanarkshire · Scotland

uPVC Repair for Walston homes

Scratch, chip, burn and hole repairs to uPVC windows, doors and sills for householders, landlords and businesses in Walston. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Holes from removed fittings and alarms
  • Scratches from ladders and furniture
Surface Doctor technician repairing a wooden kitchen worktop

UPVC repair for Walston homes

For landlords and businesses

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

uPVC repair in Walston, done in place

The damage is filled and refinished so it blends into the frame, including woodgrain finishes. We also do snagging repairs for builders. Our repair technicians work on doors & door panels, coloured and woodgrain uPVC and conservatory frames, and the jobs we see most are chips and dents and burns on sills.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it. Warm soapy water and a soft cloth are all it needs. Avoid solvents and abrasive cleaners.

Location
Walston (ML11)
Region
South Lanarkshire
Guarantee
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped white edge filled and refinished

When we would advise against a repair

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • Failed or misted double glazing units
  • Broken locks, hinges or mechanisms
  • Frames that are warped or out of square

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Coloured and woodgrain uPVC
  • White uPVC
  • Window frames & sills
  • Doors & door panels
  • Conservatory frames

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Where we work around Walston

Walston is about 13 miles east of Carluke, in South Lanarkshire. Anywhere in ML11, a technician comes to you. Our repair technicians cover 139 places in South Lanarkshire. Our nearest city page is Edinburgh, about 21 miles away.

Every address in ML11 is within our area, from the main roads to the quietest streets. Other places close to Walston include Elsrickle (1 mile south), Candy Mill (2 miles south-east), Newbigging (3 miles west), Dolphinton (3 miles east) and Kaimend (4 miles west). Further out, we also cover Carluke (13 miles west), Lanark (11 miles west), Lesmahagow (15 miles west), Law (15 miles west), Biggar (5 miles south) and Forth (9 miles north-west).

Landmarks near Walston

In Walston, that means homes near Walston Parish Church and the streets around them. Other landmarks nearby include Kello Hospital (4.9 miles south) and Edmonston Castle (2.1 miles south-east). Open spaces near Walston include Black Mount.

Map of Walston © OpenStreetMap contributors

What affects the price in Walston

Repairs from £95. We don’t charge extra for travel to Walston. The price comes down to:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • The material

Our prices are the same across the UK, with no extra for Walston. What changes the price is the job itself: the material, the amount of damage and how many items.

Quotes from your photos

Two or three clear photos are usually enough. Try to include:

  • What it’s made of, if you know
  • One picture of the entire window, door or sill
  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit

To get a price, send two or three photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.

Walston: your questions answered

Is there a call-out fee?

We do not add a call-out fee. The fixed price covers the visit and the work.

What happens once I’ve sent photos?

We come back with a fixed price. You are under no obligation.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you match woodgrain uPVC?

Yes. We recreate the colour and grain by hand.

What areas do you cover?

Everywhere in the UK, Walston included. Travel is included in the price.

Can I get a quote without a visit?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

Why repair rather than replace?

Replacing the frame or sill costs far more, and new uPVC may not match the weathered frames around it. Repairing the damage leaves the unit in place. Our uPVC repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why us?

  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • Most jobs done in one visit
  • We come to you, anywhere in the UK

See our prices page.

Common problems we fix in Walston

uPVC is hard-wearing, but it does get damaged: ladders, tools and building work scratch and chip it, candles and cigarettes burn sills, and old fittings leave holes.

Most people get in touch when they notice one of these:

  • Scratches from ladders and furniture
  • Holes from removed fittings and alarms
  • Damage during building work
  • Chips and dents

What to look for in a quote

  • Aftercare advice
  • Is the price fixed, and does it include VAT?
  • How the colour is matched
  • What protection goes down before work starts

10 questions to ask before booking

What happens on the day

We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes a few hours, and we’ll tell you if anything changes.

  1. We start by cleaning the frame.
  2. We fill scratches, chips and holes.
  3. We smooth the repair.
  4. We colour-match the finish, including woodgrain effects.
  5. We blend the repair into the surrounding surface.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.