Devon · England
uPVC window & door repair in Yelverton, Devon
Scratch, chip, burn and hole repairs to uPVC windows, doors and sills at your home in Yelverton, with a one-year guarantee on every repair.
- Repairs from £95
- Chips and dents
- Burns on sills

About our uPVC repair in Yelverton
We fill and refinish the damage to match the frame, including woodgrain finishes. Builders and developers use us for snagging repairs too. If you’re dealing with burns on sills and chips and dents, we can normally put it right, on window frames & sills, conservatory frames and doors & door panels alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. Warm soapy water and a soft cloth are all it needs. Don’t use solvents or scourers.
- Area
- Yelverton (PL20)
- Region
- Devon
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026

DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Should you replace it?
Replacing the frame or sill is a much bigger job, and it may not match the rest after years of weathering. Repairing the damage leaves the unit in place. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- One price list for the entire UK
- A year’s guarantee on all work
- Colour mixed on the day to match
- Rooms protected and left tidy
Read our full price list.
Yelverton and the surrounding area
Yelverton is about 5 miles south-east of Tavistock, in Devon. From the centre of Yelverton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Yelverton is one of 586 places in Devon where we work.
Our visits in PL20 are booked in the same way as anywhere else. You will find streets such as Ottor Road, Dousland Road and Westella Road. Close by, we cover Axtown (1 mile south-west), Meavy (1 mile east), Bickleigh (4 miles south), Wotter (4 miles south-east) and Lee Moor (5 miles south-east). Larger places within reach include Tavistock (5 miles north-west), Ivybridge (10 miles south-east), Ashburton (15 miles east), Buckfastleigh (13 miles east), South Brent (12 miles south-east) and Yealmpton (11 miles south).
Local landmarks in Yelverton
Locally, our jobs take us to homes close to Church of St Paul, Horrabridge Primary & Nursery School and Rock Inn. Other landmarks nearby include Tavistock Hospital (4.8 miles north-west) and Yelverton Paperweight Centre (less than half a mile west). The countryside around Yelverton includes Sheeps Tor and Crazywell Pool.
When we would advise against a repair
We will not take on work that will not last, so here’s what a repair cannot put right:
- Failed or misted double glazing units
- Broken locks, hinges or mechanisms
- Frames that are warped or out of square
Send us pictures and we will tell you honestly.
Materials we work on in Yelverton
- Conservatory frames
- White uPVC
- Coloured and woodgrain uPVC
- Doors & door panels
- Window frames & sills
Also in Yelverton
What uPVC repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How many areas need work
Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A photo taken from further back
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- The material, if you know it
For a price in Yelverton, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Work for landlords and builders
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Landlords, letting agents and housing providers in Yelverton use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Your questions about uPVC repair in Yelverton
How do I book?
Use the quote form or ring 0345 017 0787.
How do I get a price for uPVC repair in Yelverton?
Repairs from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your PL20 postcode.
What happens next?
We come back with a fixed price. You are under no obligation.
Can you match woodgrain uPVC?
Yes. Colour and grain are matched by hand.
Do you cover Yelverton?
Yes. We cover the entire UK and travel to Yelverton and the rest of Devon. Send us photos for a fixed quote, or call 0345 017 0787.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Are there extra charges for Yelverton?
There is no separate call-out charge. The fixed price covers the visit and the work.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
What we’re called out for in Yelverton
uPVC is tough but not indestructible: ladders and building work leave scratches and chips, candles and cigarettes burn sills, and old fittings leave holes.
Most people get in touch when they notice one of these:
- Chips and dents
- Holes from removed fittings and alarms
- Damage during building work
- Burns on sills
What your quote should include
- What aftercare is recommended
- What happens if the damage is worse than the photos show
- How the colour is matched
- Who will actually do the work
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We start by cleaning the frame.
- Scratches, chips and holes are filled.
- The repair is sanded smooth.
- We match the colour, including woodgrain finishes.
- The repair is blended into the surface around it.
Preparing for the visit
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

