Kent · England
Worktop repair in Aylesford, Kent
Our technicians come to Aylesford for chip, burn and scratch repairs to kitchen and bathroom worktops. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Gouges in the surface
- Damage around the sink cut-out
How we handle worktop repair in Aylesford
Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, with colour and pattern matched by hand. The worktop stays in place. We are frequently asked to fix a damaged sink edge and scorch marks from pans, in granite & marble, solid wood and laminate.
Every repair comes with a one-year guarantee, wherever you are in Kent.
- Where
- Aylesford (ME20)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Repair or replace: which is better?
Replacing even one length of worktop means templating, cutting, fitting and often a new sink and hob connection. A repair is a few hours with everything left in place. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Generally one visit, start to finish
- One price list for the whole UK
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page.
Questions from Aylesford
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Keeping it looking good
Nothing complicated is needed:
- Clean spills immediately
- Take care with heavy pans near edges
- Re-oil timber worktops
- Keep joints and edges dry
Use chopping boards and trivets, wipe spills right away, and keep wooden tops oiled.
Daily use can make burns and chips worse particularly around the sink. Repairing it sooner keeps the job smaller.
What worktop repair costs
Repairs from £95. We price every job individually. The main factors are:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- What kind of damage it is
- Access to the area
A repair is priced on what needs doing, not where you live. You will see the full price before booking.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Your postcode, so we can check dates
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
What we’re called out for in Aylesford
Edges and corners chip most frequently, often when something heavy catches the edge.
The most common problems we’re called about are:
- Chips near the sink
- Cuts and scratches in the surface
- Chips caused during installation
- A dent from a dropped pan
Comparing quotes
- How the room is protected while they work
- What happens if the damage is worse than the photos show
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Landlords, letting agents and housing providers in Aylesford use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
The process
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- First, we check the damage and the finish we need to match.
- We cut back any burnt or loose material.
- The area is filled and shaped.
- The pattern, flecks or grain are recreated.
- It’s finished to the same sheen and left to cure.
Getting ready for the visit
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Open a window if you can
Ask for a price
Send us pictures of the damage and one of the entire item, and tell us you are in Aylesford, and we’ll reply with a fixed quote.
Related advice
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Laminate swollen by water from underneath
- Cracks right through stone that has moved
- Discolouration deep in quartz
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Solid wood
- Granite & marble
- Solid surface (such as Corian)
- Quartz
- Laminate
Towns and villages near Aylesford
What else we do in Aylesford
About Aylesford
Aylesford is about 3 miles north-west of Maidstone, in Kent. We travel to customers in Aylesford, so you do not need to take anything anywhere. Our technicians cover 922 places in Kent. You can also see our page for London, about 28 miles away.
Our visits in ME20 work the same way as everywhere else we cover. Streets in the area include Station Road, High Street and Hall Road. We also travel to Ditton (1 mile west), Allington (1 mile south-east), East Malling (2 miles west), Well Street (2 miles south-west) and Fant (2 miles south). We also work in nearby towns such as Maidstone (3 miles south-east), Sittingbourne (12 miles east), Dartford (15 miles north-west), Sevenoaks (12 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (10 miles north-west).
What’s near Aylesford
Locally, our jobs take us to homes close to Ditton Quarry, Aylesford Primary School and Aylesford School and the streets around them. You will also find Aylesford Church (0.5 miles north-east) and The Chequers pub (less than half a mile north-east). There’s a railway station in Aylesford itself: Aylesford station. Nearby you’ll also find Allington Castle (1.7 miles east) and Medway megaliths (1.7 miles north-east). Not far away are Burham Down and Blue Bell Hill.
About our accreditations · Every repair comes with a one-year guarantee.
