Pembrokeshire · Wales

Worktop repair in Broom, Pembrokeshire

Worktop repair in and around Broom: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips near the sink
  • Burns from hot pans
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair in Broom

About our worktop repair in Broom

Different worktops need different repairs: we fill and pattern laminate, fill and polish quartz and stone, and sand and refinish wood. We always aim for a repair that blends in. If you’re dealing with burns from hot pans and a chipped quartz edge, we can generally put it right, on granite & marble, solid wood and laminate alike.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Before and after: damaged granite tiles repaired in place
Location
Broom (SA68)
Region
Pembrokeshire
Guarantee
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Covering Broom

Broom is about 11 miles east of Haverfordwest, in Pembrokeshire. Anywhere in SA68, a technician comes to you. Broom is one of 223 places in Pembrokeshire we cover.

Postcode districts we cover here: SA68. Close by, we cover Begeli (1 mile south-east), Cilgeti (1 mile south-east), Kingsmoor (1 mile south-east), Hill (1 mile south-east) and Pentlepoir (1 mile south). Within a short drive, we also cover Haverfordwest (11 miles west), Milford Haven (13 miles west), Pembroke (9 miles south-west), Pembroke Dock (9 miles west), The Marsh (11 miles north-west) and Dinbych-y-Pysgod (5 miles south).

Near you in Broom

Our customers here include homes close to Begelly Arms and Church Of St. Mary and the streets around them. The closest station to Broom is Kilgetty station, roughly 1.2 miles south-east. Nearby you will also find Narberth Museum (3.9 miles north) and Castle Ring (0.7 miles south-east). Open spaces near Broom include Pentlepoir Hill.

Map of Broom © OpenStreetMap contributors

What we do, step by step

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. We look at the damage and the worktop’s finish.
  2. Burnt or loose material is cut back.
  3. We fill and shape the damaged area.
  4. We recreate the pattern, flecks or grain.
  5. It’s finished to the same sheen and left to cure.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Let the surface dry out before the visit
  • Clear the area around the damage

Get a quote

Send us a photo of the damage and one of the whole item, with your SA68 postcode, and we will reply with a fixed price.

Send photos for a quote

Advice

Repairs by material

Wood

Timber tops can be sanded and refinished, and burns and dents repaired.

Solid surface

Solid surface tops are the same material all the way through, so scratches and burns can frequently be sanded out and refinished.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Work for landlords and builders

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

If you manage property in Broom, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

Honest limits

Before you book, it’s worth knowing the limits:

  • Severe heat marks in quartz
  • A top that moves on its units
  • A cracked stone top that’s unsupported

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Granite & marble
  • Solid surface (such as Corian)
  • Solid wood
  • Quartz
  • Laminate

What worktop repair costs

Prices start from £95. Quotes are free and the price is fixed. What we look at:

  • What the surface is made of
  • How many items we do on one visit
  • How easy the damage is to reach
  • Previous DIY repairs that have to come out

A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Send photos for a quote

Photographing the damage takes a minute. Please include:

  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • One picture of the whole worktop
  • A clear, close picture of the problem area

Getting a quote takes a couple of minutes: photograph the damage, then the whole worktop, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Repair or replace in Broom?

Even if you could get the same laminate, it may not match after years of light and use. We match the repair to your worktop as it is today. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.

Why us?

  • Work done at your home or business
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • A year’s guarantee on all work

Read our prices page.

What we’re called out for in Broom

Most chips are on edges and corners, often when something heavy catches the edge.

You may need us if you’ve spotted any of these:

  • A chipped edge
  • A chipped quartz edge
  • A heat mark or burn
  • Gouges in the surface

Questions to ask before booking

  • How to care for the finish
  • What the guarantee covers, and for how long
  • How your room will be protected
  • Whether there are any call-out or travel charges

Choosing a repair company

Questions from Broom

Do you charge for travel?

We do not add a call-out fee. Your fixed quote includes everything.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Can you match granite flecks?

Colour, flecks and veins are recreated by hand, so the repair blends into the surface.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children.

What does worktop repair cost?

Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Do you cover Broom?

Yes. We cover the entire UK and come to Broom. Send pictures and we will quote, or call 0345 017 0787.

Can a scorch mark be fixed?

Frequently, yes. We remove the damaged surface, fill it and recreate the pattern.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.