Pembrokeshire · Wales

Worktop Repair in Milford Haven

Worktop repair in and around Milford Haven: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Scratches and knife marks
  • Burns from hot pans
Surface Doctor technician repairing a wooden kitchen worktop

Need worktop repair in Milford Haven?

Worktop repair in Milford Haven, done in place

Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, with colour and pattern matched by hand. Nothing is taken out. If you are dealing with damage to a stone worktop and snagging damage in a new kitchen, we can generally put it right.

Every repair is covered by our one-year guarantee, wherever you are in Pembrokeshire.

Area
Milford Haven (SA73)
County
Pembrokeshire
Cover
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: damaged granite tiles repaired in place

What your worktop is made of matters

Laminate

Laminate is a printed surface bonded to a board. We fill damage and paint in the pattern by hand.

Wood

Timber tops can be sanded and refinished, and burns and dents repaired.

Keeping it looking good

Aftercare is simple:

  • Steer clear of strong cleaners
  • Wipe up spills quickly
  • Keep a trivet by the hob
  • Use a chopping board

Use chopping boards and trivets, wipe spills immediately, and keep wooden tops oiled.

A burn or chip can get worse with daily use particularly around the sink. Repairing it sooner keeps the job smaller.

When we would advise against a repair

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Severe heat marks in quartz
  • A top that moves on its units
  • Water-swollen laminate

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Quartz
  • Solid surface (such as Corian)
  • Solid wood
  • Granite & marble
  • Laminate

Prices and what affects them

Repairs from £95. You won’t pay by the hour. The price depends on:

  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off
  • Access to the area
  • How many areas need work

A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • Something in shot to show the size
  • The material, if you know it
  • One sharp close-up of the damage
  • Your postcode, so we can check dates

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say straight away if a repair is the right fix.

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

Should you replace it?

Stone and quartz tops are templated and cut to fit, so replacing one section is a big job. A repair takes a few hours. Our worktop repair starts from £95. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Milford Haven clients choose us

  • Repair technicians who travel to you, UK-wide
  • CHAS, Constructionline and SafeContractor accredited
  • Rooms protected and left tidy
  • Straight answers about what a repair can do

Read our full price list.

Milford Haven and nearby

Milford Haven (Welsh: Aberdaugleddau) is about 38 miles west of Llanelli, in Pembrokeshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Milford Haven is one of 223 places in Pembrokeshire where we work.

Every address in SA73 is covered, from the main roads to the quietest streets. You will find streets such as Church Road, Imogen Place and Albion Street, all of which we cover. Being close to the A4076 and B4325, Milford Haven is easy for our technicians to reach. Neighbouring places we cover include Pill (1 mile east), Haven's Head (1 mile west), Coombs (1 mile east), Hakin (1 mile west) and Priory (1 mile north). We also work in nearby towns such as Haverfordwest (7 miles north-east), Pembroke (6 miles south-east), Pembroke Dock (4 miles east), The Marsh (7 miles north-east), Dinbych-y-Pysgod (14 miles east) and The Green (14 miles east). Milford Haven is among the bigger towns we cover in Pembrokeshire.

Around Milford Haven

In Milford Haven, that means homes near Church Of St Katharine, The Victoria Inn and Milford Haven School and the streets around them. There is a railway station in Milford Haven itself: Milford Haven station. Further afield, we also cover the area around Castle Pill (0.8 miles east) and Pembroke Dock Heritage Centre (3.9 miles east). Green spaces nearby include North Hill and Hubberstown Pill.

Map of Milford Haven © OpenStreetMap contributors

Common questions in Milford Haven

What does worktop repair cost?

Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can you repair a burn in a worktop?

In most cases. A picture lets us check what’s possible.

Can you repair a chipped quartz worktop?

Yes. Chips on edges and around the sink are very common repairs, matched and polished.

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Which areas do you work in?

We cover the whole UK, including Milford Haven and the rest of Pembrokeshire. Just include your postcode and we’ll offer you dates.

Can you repair something that is been repaired before?

Typically, yes. The old repair comes out first, so let us know about it.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Landlord and trade work in Milford Haven

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

If you manage property in Milford Haven, we will quote for several properties at once. Just send photos for each address and we will price them together.

What happens on the day

The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to care for it.

  1. The area around the damage is protected.
  2. The damage is cleaned and any loose material removed.
  3. It’s filled and levelled with the surface.
  4. We recreate the colour and pattern by hand.
  5. We seal and polish it to the right sheen.

Before we arrive

  • Let us know which floor the room is on
  • Move bottles, mats and clutter away from the area
  • Have a window or extractor fan available

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the worktop, include your postcode and send them over. What comes back is a fixed price, not a guess.

Get a fixed price

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.