Scottish Borders · Scotland
Worktop repair in Burnfoot, Scottish Borders
Chip, burn and scratch repairs to kitchen and bathroom worktops for homeowners, landlords and businesses in Burnfoot. Free, fixed quotes from your photos.
- Repairs from £95
- Scorch marks from pans
- A chipped edge
Worktop repair at your home in Burnfoot
Worktops are expensive to replace and hard to match, particularly where several lengths join. Repairing the damage keeps your kitchen as it is. We work on solid surface (such as Corian), granite & marble and quartz, and the jobs we see most are a heat mark or burn and knife marks.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Location
- Burnfoot (TD9)
- Area hub
- Scottish Borders
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Burnfoot
Edges and corners chip most frequently, usually from pans, tins or dishes knocked against them.
Most people get in touch after spotting something like this:
- Cuts and scratches in the surface
- Snagging damage in a new kitchen
- Chips near the sink
- A chipped edge
Comparing quotes
- How the room is protected while they work
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- Whether the price covers travel
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Burnfoot. The price reflects:
- Whether old repairs or coatings need taking off
- How much damage there is
- The colour and finish to match
- The type of damage
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
You can take the pictures on your phone. Just make sure we can see:
- Any earlier repairs or coatings
- Where you are, by postcode
- Any details about the material
- A clear, close picture of the problem area
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
How it works
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- First we look at the damage and what the worktop is made of.
- The area is cleaned and the edges of the damage prepared.
- A filler that suits the material goes in, and missing edges are rebuilt.
- We match the colour and pattern by hand.
- The surface is sealed or finished to suit the worktop.
Before we arrive
- Let us know which floor the room is on
- Make sure the area is dry
- Point us to the nearest place to park
Getting a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
What a repair can’t fix
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Water-swollen laminate
- Through cracks in stone that is moving
- Severe heat marks in quartz
Not sure? Send photos and we will give you a straight answer.
What we work on
- Granite & marble
- Quartz
- Solid wood
- Solid surface (such as Corian)
- Laminate
Should you replace it?
Even a single new length of worktop means templating, cutting and refitting the sink and hob. A repair takes a few hours and leaves everything in place. Prices start from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
What you get with us
- Nothing taken out or refitted
- Work done at your home or business
- One price list for the entire UK
- Straight answers about what a repair can do
Read our pricing.
Also in Burnfoot
Burnfoot: your questions answered
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
What happens next?
We review the photos and send a fixed quote with dates.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
What does worktop repair cost?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What areas do you cover?
Everywhere in the UK, Burnfoot included. There is no extra charge for travel.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Different materials, different repairs
Solid surface
Solid surface materials are uniform throughout, so scratches and burns can often be sanded out and refinished.
Wood
Timber tops can be sanded and refinished, with burns and dents put right.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Burnfoot and the surrounding area
Burnfoot is about 1 mile north-east of Hawick, in the Scottish Borders. Whether you are in the middle of Burnfoot or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Burnfoot is one of 89 places in the Scottish Borders where we work. You can also see our page for Edinburgh, about 39 miles away.
Jobs in TD9 are booked in the same way as anywhere else. We regularly work on streets such as Burns Road, Eildon Road and Galalaw Road. Neighbouring places we cover include Stirches (1 mile west), Hawick (1 mile south-west), Wilton (1 mile south-west), Wilton Dean (2 miles south-west) and Denholm (4 miles north-east). Further out, we also cover Galashiels (12 miles north), Selkirk (8 miles north), Jedburgh (9 miles east), Melrose (11 miles north), Earlston (14 miles north) and Langlee (12 miles north).
What’s near Burnfoot
In Burnfoot, that means homes near The Bourtree pub, Hawick and Hawick High School, among other places. Further afield, we also cover the area around Borders Textile Towerhouse (1.2 miles south-west) and Branxholme Castle (4.1 miles south-west). Open spaces near Burnfoot include Ashkirk Loch and Ashkirk Hill.
About our accreditations · Every repair comes with a one-year guarantee.
