Dorset · England

Worktop repair in Cann, Dorset

Chip, burn and scratch repairs to kitchen and bathroom worktops at your home in Cann, with a one-year guarantee on every repair.

  • Repairs from £95
  • Knife marks
  • Burns from hot pans
Surface Doctor technician repairing a wooden kitchen worktop

Trusted worktop repair in Cann

Worktop repair in Cann, done in place

Worktops are expensive to replace and hard to match, especially in an L-shaped or long kitchen. A repair leaves the kitchen untouched. Common call-outs are for scratches and knife marks and scorch marks from pans, in solid wood, granite & marble and laminate.

The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.

Wooden worktop being repaired in a customer’s kitchen
Location
Cann (SP7)
Area hub
Dorset
Cover
A year, on every repair
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

Prices start from £95. There’s no area surcharge for Cann. What changes the price is:

  • How easy the damage is to reach
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear

A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from photos

Most quotes are done from photos alone. To make it quick:

  • Good light, ideally daylight, without flash glare
  • A photo taken from further back
  • Details of any past repairs
  • Your postcode, so we can check dates

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Do you need worktop repair in Cann?

Cut-outs for the sink and hob are the weakest parts, and that is where cracks often begin.

If you can see any of these, send us a picture:

  • Knife marks
  • Scorch marks from pans
  • Gouges in the surface
  • Chips on edges and corners

Questions to ask before booking

  • Whether the colour is mixed to match
  • Whether the price covers travel
  • A fixed quote, and whether VAT is included
  • What preparation is included

10 questions to ask before booking

How to look after the repair

After the repair has cured, a few habits help it last:

  • Never put hot pans down directly
  • Steer clear of strong cleaners
  • Do not leave spills to soak in
  • Oil wooden tops regularly

Always use a trivet and chopping board, wipe spills straight away, and keep wooden tops oiled.

Daily use can make burns and chips worse particularly around the sink. An earlier repair is a smaller repair.

Landlords, agents and businesses in Cann

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Landlords, letting agents and housing providers in Cann use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Different materials, different repairs

Wood

Timber tops can be sanded and refinished, with burns and dents put right.

Quartz

Quartz is hard, but its edges are brittle. We fill chips with a tinted resin and polish them.

Should you replace it?

Stone and quartz have to be templated and cut, so replacing a section takes time and money. A repair takes a few hours. Our worktop repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Generally one visit, start to finish
  • A year’s guarantee on all work
  • Dust sheets down, tidy finish

Take a look at our full price list.

Common questions in Cann

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

How much do I need to move?

Only around the repair. The rest of the kitchen stays usable.

Can you repair a chipped quartz worktop?

Yes. We repair quartz chips regularly, matched and polished.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Can you quote from pictures?

Normally, yes. Clear photos let us give you a fixed price without visiting.

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

Can you match granite flecks?

Yes. We recreate the pattern by hand.

What happens once I’ve sent photos?

We come back with a fixed price. There is no obligation to book.

Covering Cann

Cann is about 9 miles north of Blandford Forum, in Dorset. Jobs in Cann are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our technicians cover 462 places in Dorset, from the larger towns to small villages.

We work across SP7 and the streets around it. From Foot's Hill, Bozley Hill and Cann Hill or anywhere nearby, we can come to you. Nearby, we also work in West Melbury (1 mile south-west), Cann Common (1 mile east), East Melbury (1 mile south-east), Melbury Abbas (1 mile south-east) and Compton Abbas (2 miles south). Further out, we also cover Blandford Forum (9 miles south), Verwood (15 miles south-east), Gillingham (5 miles north-west), Sherborne (15 miles west), Peacemarsh (6 miles north-west) and Sturminster Newton (7 miles south-west).

What’s near Cann

In Cann, that means homes near Shaftesbury School, St Mary's School and Church of St Thomas, among other places. Well-known places in the area include Kings Court Palace (4.8 miles north-west) and Westminster Memorial Hospital (1.4 miles north-west). For a walk, there is Melbury Hill.

Map of Cann © OpenStreetMap contributors

The process

You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It generally takes a few hours, and you’re welcome to carry on with your day while we work.

  1. We look at the damage and the worktop’s finish.
  2. Burnt or loose material is cut back.
  3. The area is filled and shaped.
  4. The pattern, flecks or grain are recreated.
  5. It’s finished to the same sheen and left to cure.

How to prepare

  • Point us to the nearest place to park
  • Tell us about parking, stairs or access
  • Plan for the room to be out of bounds to pets and children

How to get a price

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a free quote

Read more

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.