Neath Port Talbot · Wales
Worktop repair in Corlannau, Neath Port Talbot
Chip, burn and scratch repairs to kitchen and bathroom worktops in Corlannau, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped quartz edge
- Knife marks
Worktop repair in Corlannau without replacing anything
A damaged worktop does not have to mean a new kitchen. The damage is filled and refinished to blend into the surface around it. Our repair technicians work on granite & marble, solid surface (such as Corian) and quartz, and people most frequently call us about chipped corners and burns from hot pans.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Corlannau (SA13, SA12)
- County
- Neath Port Talbot
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Corlannau
Most chips are on edges and corners, typically from pans, tins or dishes knocked against them.
If you can see any of these, send us a picture:
- Damage around the sink cut-out
- Gouges in the surface
- Damage from fitting or building work
- A heat mark or burn
What your quote should include
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- How the colour is matched
- What prep work is covered
How to look after the repair
It’s all simple stuff:
- Do not let water sit on joints
- Don’t cut directly on the worktop
- Watch the edges with heavy pans
- Oil wooden tops regularly
Use chopping boards and trivets, wipe spills right away, and re-oil wooden worktops regularly.
A burn or chip can get worse with daily use. An earlier repair is a smaller repair.
Repair or replace: which is better?
Even a single new length of worktop means templating, cutting and refitting the sink and hob. A repair is a few hours with everything left in place. Our worktop repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Corlannau customers choose us
- Technicians who travel to you, UK-wide
- One price list for the entire UK
- Everything repaired in place
- Most jobs done in one visit
Read our full price list.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A cracked stone top that’s unsupported
- Deep heat discolouration in quartz, which may not fully disappear
- Failed support under the worktop
Send us photos and we will tell you honestly before you book.
Materials we work on in Corlannau
- Laminate
- Solid wood
- Quartz
- Solid surface (such as Corian)
- Granite & marble
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First, we check the damage and the finish we need to match.
- We cut back any burnt or loose material.
- We fill and shape the damaged area.
- We recreate the pattern, flecks or grain.
- It’s finished to the same sheen and left to cure.
Preparing for the visit
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
- Let the surface dry out before the visit
How to get a price
For a price in Corlannau, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Nearby places to Corlannau
Other services in Corlannau
Materials and what they mean for the repair
Wood
Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.
Laminate
Laminate worktops have a printed decorative layer over a board core. Chips and burns are filled and the pattern recreated by hand.
Common questions in Corlannau
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
What happens next?
You’ll get a fixed quote back. There’s no obligation to book.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.
Can a scorch mark be fixed?
In most cases. A photo lets us check what’s possible.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Covering Corlannau
Corlannau is about 1 mile north-east of Port Talbot, in Neath Port Talbot. Clients in Corlannau get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Corlannau is one of 100 places in Neath Port Talbot we cover.
Jobs in SA13 and SA12 are booked in the same way as anywhere else. From Ford Road, Forge Road and High Street or anywhere nearby, we can come to you. With the M4 and A4107 close by, Corlannau is easy for our repair technicians to reach. Neighbouring places we cover include Caerhendy (1 mile north-east), Brynbryddan (1 mile north), Cwmavon (1 mile north-east), Cwmbychan (1 mile north) and Pwll-y-glaw (2 miles north-east). Within a short drive, we also cover Neath (4 miles north), Mount Pleasant (4 miles north), Pontardawe (9 miles north), Glyn-neath (12 miles north-east), Pentreffynnon (5 miles north-west) and Pencaerau (4 miles north-west).
Around Corlannau
Locally, our jobs take us to homes close to Glan Afan Comprehensive School, St Agnes Church and Maggie Mays pub and the streets around them. For rail, the closest station is Port Talbot Parkway station, roughly 0.8 miles south of the centre. Nearby you’ll also find Aberafan Castle (0.7 miles south-west) and Aberafan Centre (0.6 miles south-west). Not far away are Mynydd Dinas and Gnoll Estate Country Park lake 1.
About our accreditations · Every repair comes with a one-year guarantee.
