Neath Port Talbot · Wales

Sink & basin repair in Corlannau, Neath Port Talbot

Problem with your basin in Corlannau? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Fine cracks across the glaze
  • Chips on a built-in basin
Surface Doctor technician refinishing the outside of a roll-top bath

Book sink repair in Corlannau

About our sink repair in Corlannau

If the entire basin is crazed or worn, it can be resurfaced in place, giving it an even new finish. We are frequently asked to fix a period basin that needs restoring and a crack near the taps, across antique & period basins, vanity unit basins and ceramic & vitreous china basins.

We stand behind the work with a one-year guarantee.

Where
Corlannau (SA13, SA12)
County
Neath Port Talbot
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Cracked basin edge repaired and blended in (before and after)

Different materials, different repairs

Composite and resin

Cast mineral and resin basins are common in vanity units. They repair well, and the colour is mixed to suit.

Period and antique

Period basins frequently have marks and character worth keeping. We repair them sympathetically.

Corlannau: your questions answered

How do I get a price for sink repair in Corlannau?

Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up and a photo of the whole item with your SA13 postcode.

Can you repair a chipped basin?

Yes. The chip is filled, matched and polished.

Do you restore period basins?

Yes. We repair around makers’ marks where we can. Tell us about it when you send pictures.

What areas do you cover?

Everywhere in the UK, Corlannau included. Travel is included in the price.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Neath Port Talbot.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.

Why repair rather than replace?

A new basin often means a plumber, new taps and a new waste and making good the tiling. A repair keeps the basin you have. Prices start from £95. We charge the same wherever you are, with no extra for Corlannau. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why us?

  • One-year guarantee on every repair
  • Straight answers about what a repair can do
  • Normally one visit, start to finish
  • Colour mixed on the day to match

Take a look at our prices page.

Landlords, agents and businesses in Corlannau

We work for landlords, letting agents and housing providers in Corlannau as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.

When to call us in Corlannau

Fine crazing in the glaze is typically down to age, and strong chemicals speed it up.

Send us a photo if you notice any of these:

  • Cracks starting at the waste
  • A chipped vanity basin
  • Chips from dropped toiletries
  • Chips around the rim

Comparing quotes

  • What preparation is included
  • Whether the colour is mixed to match
  • How soon you can use it again
  • Whether the price is fixed and includes VAT

Our hiring checklist

Should I try a DIY kit first?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

What we do, step by step

Arrival times are agreed in advance. Once we are there, the work takes a morning or an afternoon. The room is left tidy and you will know when it can be used.

  1. The vanity, floor and taps are protected.
  2. The damage is cleaned and prepared.
  3. We fill it and shape it to the basin’s curve.
  4. We match the colour by hand.
  5. We polish it to match the shine and leave it to cure.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat
  • Tell us about any previous repairs or coatings

Getting a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Send pictures for a quote

Advice

Looking after it afterwards

Aftercare is simple:

  • Use gentle cleaners
  • Ask a plumber not to overtighten fittings
  • Use mild cleaners only
  • Do not stand heavy bottles on the edge

Use gentle cleaners and avoid dropping heavy bottles or appliances into the basin.

A chip near the waste or taps can let water into the body of the basin and stain. Repairing it early keeps the job small.

How we price sink repair

Repairs from £95. You will not pay by the hour. The price depends on:

  • The material
  • Previous DIY repairs that have to come out
  • What kind of damage it is
  • Access to the area

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.

Getting a price from pictures

A couple of clear pictures is all it takes. Try to include:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • Something in shot to show the size
  • A clear, close picture of the problem area

The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.

About Corlannau

Corlannau is about 1 mile north-east of Port Talbot, in Neath Port Talbot. From the centre of Corlannau to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Corlannau is one of 100 places in Neath Port Talbot where we work.

Jobs in SA13 and SA12 work the same way as everywhere else we cover. From Ford Road, Forge Road and High Street or a nearby road, we can come to you. With the M4 and A4107 close by, Corlannau is simple for us to get to. Nearby, we also work in Caerhendy (1 mile north-east), Brynbryddan (1 mile north), Cwmavon (1 mile north-east), Cwmbychan (1 mile north) and Pwll-y-glaw (2 miles north-east). Further out, we also cover Neath (4 miles north), Mount Pleasant (4 miles north), Pontardawe (9 miles north), Glyn-neath (12 miles north-east), Pentreffynnon (5 miles north-west) and Pencaerau (4 miles north-west).

Around Corlannau

In Corlannau, that means homes near Glan Afan Comprehensive School, St Agnes Church and Maggie Mays pub and the streets around them. For rail, the closest station is Port Talbot Parkway station, roughly 0.8 miles south. Other landmarks nearby include Aberafan Castle (0.7 miles south-west) and Aberafan Centre (0.6 miles south-west). For a walk, there is Mynydd Dinas and Gnoll Estate Country Park lake 1.

Map of Corlannau © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.