Staffordshire · England

Worktop Repair in Coxgreen

Chip, burn and scratch repairs to kitchen and bathroom worktops at your home in Coxgreen, with a one-year guarantee on every repair.

  • Repairs from £95
  • A chipped quartz edge
  • Chips near the sink
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in Coxgreen

About our worktop repair in Coxgreen

We repair chips, burns and scratches in laminate, stone, quartz, solid surface and wooden worktops, matching the colour and pattern by hand. The worktop stays in place. Our repair technicians work on quartz, granite & marble and solid wood, and common reasons people get in touch are damage around the sink cut-out and a heat mark or burn.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Surface Doctor technician repairing a wooden kitchen worktop
Where
Coxgreen (DY7)
Area hub
Staffordshire
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

For landlords and businesses

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Should you replace it?

Even if you could get the same laminate, it may not match after years of light and use. We match the repair to your worktop as it is today. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Why us?

  • Free fixed quotes from pictures
  • A year’s guarantee on all work
  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do

Read our pricing.

Coxgreen and the surrounding area

Coxgreen is about 5 miles west of Kingswinford, in Staffordshire. Across the DY7 area, we carry out the work at your property. We work in 512 places across Staffordshire, from the larger towns to small villages. We work right across the region, from Coxgreen to Birmingham (about 17 miles away).

Here we cover the DY7 postcode area. We regularly work on streets such as Morfe Lane and Hollies Lane. Neighbouring places we cover include Four Ashes (1 mile north-west), Enville (1 mile east), Compton (1 mile south-east), Lutley (2 miles north) and Kinver (3 miles south-east). We also work in nearby towns such as Wombourne (5 miles north-east), Codsall (11 miles north), Brewood (15 miles north), Bilbrook (11 miles north-east), Bratch (6 miles north-east) and Claverley (4 miles north).

Landmarks near Coxgreen

Our customers here include homes close to Church of St Mary, among other places. Nearby you will also find Stourton Castle (3.4 miles east) and Wordsley Hospital (5.3 miles east). Not far away are Stourton Pit and Kinver Edge.

Map of Coxgreen © OpenStreetMap contributors

When to call us in Coxgreen

Worktops take more punishment than anything else in the kitchen. Hot pans leave burns, knives cut, and edges chip when heavy pans or tins hit them.

Common reasons people in Coxgreen contact us are:

  • Chips on edges and corners
  • Snagging damage in a new kitchen
  • Knife marks
  • A chipped quartz edge

Comparing quotes

  • How changes to the job are handled
  • Whether they match the colour on site
  • What prep work is covered
  • If travel is included in the price

10 questions to ask before you book

Common questions in Coxgreen

Is a repair better than a new one?

Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

What happens next?

You will get a fixed quote back, normally with dates to choose from. You’re under no obligation.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can a quartz edge be fixed?

Yes. Chips on edges and around the sink are very common repairs, matched and polished.

Can you repair something that is been repaired before?

Usually, yes. We remove the old repair before doing a new one, so mention it when you send photos.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we will do the rest.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Steer clear of strong cleaners
  • Do not let water sit on joints
  • Never put hot pans down directly
  • Clean spills right away

Keep joints and the sink edge dry, particularly with laminate and timber.

Don’t leave damage by the sink, because water gets in and swells the board.

How the visit works

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take a few hours, depending on the damage, tidy-up included.

  1. We start by checking the damage and the worktop material.
  2. We clean the area and prepare the edges of the damage.
  3. We fill with a filler suited to the material and rebuild any missing edge.
  4. We recreate the colour and pattern by hand.
  5. Finally we seal or finish the area to match.

Preparing for the visit

  • Let us know if it has been repaired before
  • Make sure the area is dry
  • Tell us about parking, stairs or access

Ask for a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Send photos for a quote

Advice

What worktop repair costs

Prices start from £95. A fixed quote means you know the cost before you book. We look at:

  • What the surface is made of
  • What kind of damage it is
  • Unusual colours or finishes
  • Whether we combine several jobs

We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your photos

We price nearly every job from pictures. This is what to send:

  • Any earlier repairs or coatings
  • Natural light rather than flash
  • One sharp close-up of the damage
  • The postcode, so we can plan the visit

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Materials and what they mean for the repair

Solid surface

Solid surface materials are uniform throughout, so marks can frequently be sanded and refinished.

Granite and stone

Natural stone worktops chip at edges and around cut-outs. The repair is filled and polished to the stone’s finish.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.