Neath Port Talbot · Wales

Worktop Repair in Cwrt Herbert

Chip, burn and scratch repairs to kitchen and bathroom worktops for householders, landlords and businesses in Cwrt Herbert. Send photos for a free, fixed quote.

  • Repairs from £95
  • Chips caused during installation
  • Scorch marks from pans
Surface Doctor technician repairing a wooden kitchen worktop

Need worktop repair in Cwrt Herbert?

Worktop repair in Cwrt Herbert, done in place

A worktop repair is carried out in your kitchen, with the area around the damage covered. Most jobs take a few hours, and you can use the worktop again shortly afterwards. We are often asked to fix a chipped quartz edge and damage around the sink cut-out, on solid surface (such as Corian), granite & marble and quartz.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Speckled stone tiles with chips repaired to match the pattern
Area
Cwrt Herbert (SA10, SA11)
Region
Neath Port Talbot
Warranty
A year, on every repair
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Aftercare tips

How the surface is treated afterwards matters:

  • Dry around the sink and joints
  • Keep a trivet by the hob
  • Watch the edges with heavy pans
  • Use a chopping board

Wipe water away from joints and around the sink, particularly with laminate and timber.

A burn or chip can get worse with daily use. Repairing it sooner keeps the job smaller.

How the visit works

Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. It normally takes a morning or an afternoon, and we will keep you posted as we go.

  1. We start by checking the damage and the worktop material.
  2. Next we clean up and prepare the damaged area.
  3. We fill with a filler suited to the material and rebuild any missing edge.
  4. We recreate the colour and pattern by hand.
  5. We seal or finish the surface to suit the worktop.

Before we arrive

  • Clear the area around the damage
  • Keep pets and children out of the room while we work
  • Mention any earlier repairs or resurfacing

Getting a price

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Send pictures for a quote

Read more

Questions from Cwrt Herbert

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

How do I get a price for worktop repair in Cwrt Herbert?

Repairs from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your SA10 postcode.

Can you match granite flecks?

We match colour, flecks and veining by hand, so the repair blends into the surface.

What happens after I send pictures?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Can you quote from photos?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.

Do you work in Cwrt Herbert?

Yes, we do. Technicians travel to Cwrt Herbert from across the region, with no extra charge for travel.

Work for landlords and builders

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Should you replace it?

If the worktop is swollen by water or badly damaged along its length, replacement may be the answer. For chips, burns and scratches, repair is typically far better value. Our worktop repair starts from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why book with us

  • A year’s guarantee on all work
  • We will tell you if it’s not worth repairing
  • Colours mixed by hand to suit your surface
  • Same prices wherever you are

Read our prices page.

Honest limits

It helps to know what we cannot do:

  • A worktop that has moved because its support has failed
  • Cracks right through stone that has moved
  • Water-swollen laminate

Send us photos and we will tell you honestly.

Materials we work on in Cwrt Herbert

  • Quartz
  • Granite & marble
  • Laminate
  • Solid wood
  • Solid surface (such as Corian)

What we are called out for in Cwrt Herbert

Most chips are on edges and corners, often when something heavy catches the edge.

Typical reasons for a call-out include:

  • Scorch marks from pans
  • A chipped edge
  • A chipped quartz edge
  • A damaged sink edge

Before booking anyone

  • When it can be used again
  • What the guarantee covers, and for how long
  • Whether the colour is mixed to match
  • How the room is protected while they work

Our hiring checklist

Repairs by material

Granite and stone

Granite and stone chip at edges and cut-outs. The repair is filled and polished to the stone’s finish.

Quartz

Quartz worktops are mostly stone set in resin. We fill and polish chipped edges to match the sheen.

About Cwrt Herbert

Cwrt Herbert is about 1 mile north-west of Neath, in Neath Port Talbot. Jobs in Cwrt Herbert are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover 100 places in Neath Port Talbot.

We cover every part of the SA10 and SA11 postcode area and the streets around it. Whether you live on Taillwyd Road, Cadoxton Road and Dynevor Avenue or a nearby road, a technician can come to you. With the A465 and A474 close by, Cwrt Herbert is simple for us to get to. Close by, we cover Waun-ceirch (1 mile north-west), Cadoxton-juxta-Neath (1 mile north-east), Neath (1 mile south-east), Rhyding (1 mile north-east) and Neath Abbey (1 mile south-west). Larger places within reach include Port Talbot (5 miles south), Sandfields (5 miles south), Baglan Moors (4 miles south), Sandfields West (5 miles south), Sandfields East (5 miles south) and Pontardawe (4 miles north).

Around Cwrt Herbert

Our customers here include homes close to The Smiths Arms, St Thomas's Church and Dwr-y-Felin Comprehensive School. The nearest railway station is Neath station, roughly 0.5 miles south-east. Well-known places in the area include Tonna Hospital (2.4 miles east) and Granvilles Castle (less than half a mile south-east). Green spaces nearby include Cwm Clydach RSPB Reserve and Neath Abbey Craig.

Map of Cwrt Herbert © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.