Powys · Wales

Worktop repair in Felindre, Powys

Chip, burn and scratch repairs to kitchen and bathroom worktops for homes and businesses in Felindre and across Powys. Send pictures for a free, fixed quote.

  • Repairs from £95
  • A heat mark or burn
  • A chipped quartz edge
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair in Felindre

Felindre: your questions answered

What does worktop repair cost?

Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Do you cover Felindre?

We do. We send a technician to Felindre for every job, with no extra charge for travel.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Which areas do you work in?

We work UK-wide, and that includes Felindre. Our prices are the same everywhere.

Is a repair better than a new one?

Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Do I need to clear the kitchen?

Only around the repair. The rest of the kitchen stays usable.

How we handle worktop repair in Felindre

Different worktops need different repairs: we fill and pattern laminate, fill and polish quartz and stone, and sand and refinish wood. The goal is always a repair that blends in. Typical jobs include damage from fitting or building work and damage to a stone worktop, across solid surface (such as Corian), quartz and granite & marble.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Close-up of a technician filling damage on a solid wood worktop
Area
Felindre (LD3)
Region
Powys
Cover
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

How it works

We agree an arrival time beforehand. Once we’re there, the work takes a few hours, depending on the damage for most jobs. The room is left tidy and ready to use once it has cured.

  1. First we look at the damage and what the worktop is made of.
  2. Next we clean up and prepare the damaged area.
  3. A filler that suits the material goes in, and missing edges are rebuilt.
  4. We match the colour and pattern by hand.
  5. Finally we seal or finish the area to match.

Getting ready for the visit

  • Let us know which floor the room is on
  • Let the surface dry out before the visit
  • Keep a parking space free if you can

Getting a price

Upload photos of the damage and one of the entire item, with your LD3 postcode, and we will come back with a fixed quote.

Get a fixed quote

Advice

Prices and what affects them

Repairs from £95. You’ll know the full cost before you book. We take into account:

  • The colour and finish to match
  • The size and number of damaged areas
  • The material
  • How many items we do on one visit

The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Getting a price from photos

When you take your photos, a few simple things make all the difference:

  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Our work in Felindre

Felindre is about 15 miles north-west of Abergavenny, in Powys. Customers in Felindre get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Felindre is one of 234 places in Powys we cover. You can also see our page for Birmingham, about 63 miles away.

Our visits in LD3 are booked in the same way as anywhere else. You’ll find streets such as Trem y Mynydd Du and Nant-y-Deri, and we cover them all. We also cover the places around Felindre: Gwernyfed (1 mile east), Glasbury (2 miles north), Llanigon (3 miles north-east), Hay (4 miles north-east) and Y Gelli Gandryll (4 miles north-east). Within a short drive, we also cover Brecon (10 miles south-west), Llanfair-ym-Muallt (13 miles north-west), Llanfaes (11 miles south-west), Crughywel (12 miles south), Talgarth (3 miles south-west) and Pendre (10 miles south-west).

Local landmarks in Felindre

Locally, our jobs take us to homes close to The Three Horseshoes pub and Gwernyfed High School. Other landmarks nearby include Bronllys Hospital (3.3 miles west) and Tre-goed a Felindre (within half a mile south-east). The countryside around Felindre includes The Allt and Glasbury oxbow.

Map of Felindre © OpenStreetMap contributors

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Dry around the sink and joints
  • Never put hot pans down directly
  • Don’t leave spills to soak in
  • Take care with heavy pans near edges

Hot pans should always go on a trivet. Even stone and quartz can be marked by heat.

Do not leave damage by the sink, as water can get in and cause swelling.

What your worktop is made of matters

Wood

Wooden worktops can be sanded, filled and re-oiled, with burns and dents put right.

Granite and stone

Natural stone worktops chip at edges and around cut-outs. We fill and polish the repair to match the stone.

Repair or replace in Felindre?

Stone and quartz tops are templated and cut to fit, so replacing one section is a big job. A repair takes a few hours. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Felindre

  • CHAS, Constructionline and SafeContractor accredited
  • Work done at your home or business
  • Colours mixed by hand to suit your surface
  • One visit for most repairs

Take a look at our pricing.

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

For landlords and businesses

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

When a repair isn’t the answer

A repair isn’t always the answer, and we’ll tell you before we start. Repairs won’t solve:

  • Discolouration deep in quartz
  • Laminate swollen by water from underneath
  • A worktop that has moved because its support has failed

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Felindre

  • Solid wood
  • Granite & marble
  • Solid surface (such as Corian)
  • Laminate
  • Quartz
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.