Nottinghamshire · England

Worktop repair in Holbeck, Nottinghamshire

Our repair technicians come to Holbeck for chip, burn and scratch repairs to kitchen and bathroom worktops. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Chips in quartz or granite
  • Knife marks
Surface Doctor technician repairing a wooden kitchen worktop

Need worktop repair in Holbeck?

Signs you need worktop repair in Holbeck

Most chips are on edges and corners, generally from pans, tins or dishes knocked against them.

You may need us if you’ve spotted any of these:

  • Damage around the sink cut-out
  • Scratches and knife marks
  • Chips on edges and corners
  • Snagging damage in a new kitchen

What your quote should include

  • If travel is included in the price
  • How your room will be protected
  • Whether they match the colour on site
  • What preparation is included

How to compare quotes

Worktop repair in Holbeck, done in place

A worktop repair is carried out in your kitchen. Most repairs take a few hours, and the worktop can be used again soon after. We regularly repair solid wood, granite & marble and solid surface (such as Corian), and the jobs we see most are a chipped edge and cuts and scratches in the surface.

All our work comes with a one-year guarantee.

Location
Holbeck (S80, NG20)
County
Nottinghamshire
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Chips in speckled granite tiles filled and colour matched, before and after

What a repair cannot fix

We will always be straight with you, so here’s what a repair will not do:

  • Failed support under the worktop
  • Deep heat discolouration in quartz, which may not fully disappear
  • Through cracks in stone that is moving

Send us photos and we will tell you honestly.

Surfaces we repair

  • Solid wood
  • Granite & marble
  • Quartz
  • Solid surface (such as Corian)
  • Laminate

Looking after it afterwards

So the finish stays in good condition:

  • Do not leave spills to soak in
  • Chopping boards prevent scratches
  • Steer clear of strong cleaners
  • Dry around the sink and joints

Wipe water away from joints and around the sink, particularly with laminate and timber.

Don’t leave damage by the sink, because water gets in and swells the board.

Covering Holbeck

Holbeck is about 4 miles north of Shirebrook, in Nottinghamshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Holbeck is one of 329 towns and villages in Nottinghamshire we cover. Our nearest city page is Leeds, about 41 miles away.

Postcode districts we cover here: S80 and NG20. Nearby, we also work in Holbeck Woodhouse (1 mile east), Cuckney (2 miles south-east), Norton (2 miles east), Hodthorpe (2 miles north) and Church Warsop (3 miles south-east). We also work in nearby towns such as Mansfield (8 miles south), Worksop (5 miles north-east), Sutton in Ashfield (9 miles south), Hucknall (15 miles south), Retford (11 miles north-east) and Mansfield Woodhouse (6 miles south).

Local landmarks in Holbeck

We visit homes around St Winifred's Church. The closest station to Holbeck is Creswell station, about 1.4 miles north-west. Nearby you will also find Creswell Crags Museum and Heritage Centre (1.8 miles north) and Norton and Cuckney (1.9 miles south-east). Not far away are Sandhill Lake.

Map of Holbeck © OpenStreetMap contributors

Holbeck questions

How quickly can you book me in?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.

Is a repair better than a new one?

Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How we price worktop repair

Prices start from £95. We charge the same across the UK, including Holbeck. The price reflects:

  • The material
  • The type of damage
  • How much damage there is
  • Any earlier repairs that need removing first

The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Send pictures for a quote

You can usually get a fixed quote without us visiting. To help us price it:

  • Any earlier repairs or coatings
  • Where you are, by postcode
  • Daylight if possible, and no flash reflection
  • A wider photo showing the whole worktop

A quote takes minutes to ask for: take one close-up and one wider shot of the worktop, add your postcode and send them over. You will get a fixed quote, not an estimate.

Should you replace it?

Stone and quartz have to be templated and cut, so replacing one section is a big job. A repair takes a few hours. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

What you get with us

  • Typically one visit, start to finish
  • No extra charge for your area
  • No need to remove anything
  • Straight answers about what a repair can do

Take a look at our pricing.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

How it works

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We start by checking the damage and the worktop material.
  2. Next we clean up and prepare the damaged area.
  3. A filler that suits the material goes in, and missing edges are rebuilt.
  4. We recreate the colour and pattern by hand.
  5. The surface is sealed or finished to suit the worktop.

Before we arrive

  • Tell us about any previous repairs or coatings
  • Let us know which floor the room is on
  • Clear the area around the damage

How to get a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a free quote

Related advice

Repairs by material

Quartz

Quartz is tough, though edges can chip. Chips are filled with tinted resin and polished.

Wood

Timber tops can be sanded and refinished, and burns and dents repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.