Kent · England
Worktop Repair for Oad Street homes
Our technicians come to Oad Street for chip, burn and scratch repairs to kitchen and bathroom worktops. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Knife marks
- Dents and gouges
Oad Street: your questions answered
Do you come to Oad Street?
Yes. We cover the entire UK and come to Oad Street and the rest of Kent. Send us pictures for a fixed quote, or call 0345 017 0787.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
How do I get a price for worktop repair in Oad Street?
Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before you book.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Worktop repair in Oad Street, done in place
We repair worktops in place. Most jobs take a few hours, and the worktop can be used again soon after. If you are dealing with a dent from a dropped pan and a heat mark or burn, we can usually put it right, on laminate, solid surface (such as Corian) and granite & marble alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Oad Street (ME9)
- Region
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Oad Street
Oad Street is about 3 miles south-west of Sittingbourne, in Kent. Anywhere in ME9, we carry out the work at your property. We cover all 922 towns and villages across Kent, from the larger towns to small villages. Our nearest city page is London, about 35 miles away.
Jobs in ME9 work the same way as everywhere else we cover. Neighbouring places we cover include Danaway (1 mile north-west), Chestnut Street (1 mile north), Silver Street (1 mile south-east), Bredgar (1 mile south-east) and South Green (2 miles south-west). Larger places within reach include Maidstone (8 miles south-west), Ashford (15 miles south-east), Sittingbourne (3 miles north-east), Gravesend (15 miles north-west), Whitstable (15 miles east) and Faversham (9 miles east).
What’s near Oad Street
We visit homes around Westlands School, Borden Church of England Primary School and Plough & Harrow pub. For rail, the closest station is Newington station, about 1.9 miles north of the centre. Well-known places in the area include Sittingbourne and Milton Urban District (2.8 miles north-east) and Bayford Court (2.9 miles east). Green spaces nearby include Detling Hill.
What affects the price in Oad Street
Prices start from £95. Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Whether we combine several jobs
- Any earlier repairs that need removing first
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
When you take your pictures, a few simple things make all the difference:
- Something in shot to show the size
- What it’s made of, if you know
- Any earlier repairs or coatings
- One picture of the whole worktop
Getting a quote takes a couple of minutes: photograph the damage, then the entire worktop, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Common problems we fix in Oad Street
Cut-outs for the sink and hob are the weakest parts, and that is where cracks frequently begin.
These are the problems we’re asked about most:
- Gouges in the surface
- Chipped corners
- A heat mark or burn
- Damage from fitting or building work
What to look for in a quote
- What aftercare is recommended
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
Materials and what they mean for the repair
Quartz
Quartz is tough, though edges can chip. Chips are filled with tinted resin and polished to the worktop’s finish.
Granite and stone
Granite and stone chip at edges and cut-outs. We fill and polish the repair to match the stone.
Landlords, agents and businesses in Oad Street
We work for landlords, letting agents and housing providers in Oad Street as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Also near Oad Street
What else we do in Oad Street
How the visit works
We begin by going over the job with you. After that, protection goes down around the work area and we start. You can expect it to take a few hours.
- We look at the damage and the worktop’s finish.
- Burnt or loose material is cut back.
- We fill and shape the damaged area.
- The pattern, flecks or grain are recreated.
- It’s finished to the same sheen and left to cure.
Before we arrive
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Related advice
When we would advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Water-swollen laminate
- A cracked stone top that is unsupported
- A top that moves on its units
If in doubt, send pictures and we will say what we think.
What we work on
- Granite & marble
- Solid surface (such as Corian)
- Quartz
- Solid wood
- Laminate
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
How to care for the repair
So the finish stays in good condition for years:
- Keep wood oiled
- Steer clear of strong cleaners
- Don’t knock pans against the edge
- Never put hot pans down directly
Hot pans should always go on a trivet. Heat can mark quartz and stone as well.
A burn or chip can get worse with daily use. An earlier repair is a smaller repair.
About our accreditations · Every repair comes with a one-year guarantee.
