Hampshire · England

Worktop Repair in Old Alresford

Our repair technicians come to Old Alresford for chip, burn and scratch repairs to kitchen and bathroom worktops. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Damage to a stone worktop
  • A heat mark or burn
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair near Old Alresford

Worktop repair in Old Alresford without replacing anything

Each type of worktop needs a different approach: laminate is filled and patterned, quartz and stone are filled and polished, and wood is sanded and refinished. We always aim for a repair that blends in. Our repair technicians work on solid surface (such as Corian), quartz and granite & marble, and the jobs we see most are chips in quartz or granite and damage around the sink cut-out.

You get a one-year guarantee, the same in Old Alresford as everywhere else we work.

Before and after: damaged granite tiles repaired in place
Location
Old Alresford (SO24)
Region
Hampshire
Guarantee
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

What worktop repair costs

Prices start from £95. Quotes are free and the price is fixed. What we look at:

  • What kind of damage it is
  • How easy the damage is to reach
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed price

Good photos mean an accurate price. Here’s what helps:

  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage
  • Any earlier repairs or coatings
  • The material, if you know it

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the worktop, add your postcode and send them over. What comes back is a fixed price, not a guess.

About Old Alresford

Old Alresford is about 7 miles north-east of Winchester, in Hampshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Old Alresford is one of 683 places in Hampshire we cover. We work right across the region, from Old Alresford to London (54 miles away).

We cover every part of the SO24 postcode area. From Kiln Lane, Colden Lane and The Brook or anywhere nearby, a technician can come to you. Nearby, we also work in Bighton (1 mile east), Northington (2 miles north-west), Totford (3 miles north-west), Brown Candover (3 miles north) and Upper Wield (4 miles north-east). Further out, we also cover Basingstoke (11 miles north), Winchester (7 miles south-west), Eastleigh (12 miles south-west), Horndean (15 miles south-east), Chandler's Ford (13 miles south-west) and Alton (9 miles east).

What’s near Old Alresford

Our customers here include homes close to Church of St Mary, Perins School and The Globe Inn. Other landmarks nearby include Barton Castle (3.1 miles north-east).

Map of Old Alresford © OpenStreetMap contributors

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What happens on the day

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours in most cases. The room is left tidy and ready to use once it has cured.

  1. We protect the rest of the kitchen.
  2. The damage is cleaned and any loose material removed.
  3. We fill it and level it with the worktop.
  4. The colour and pattern are built up by hand.
  5. The repair is sealed and polished to match.

How to prepare

  • Keep a parking space free if you can
  • Avoid using the area for a few hours before we arrive
  • Tell us if there are stairs or a lift

How to get a price

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a fixed price

Advice

What we’re called out for in Old Alresford

Edges and corners chip most often, often when something heavy catches the edge.

These are the problems we are asked about most:

  • Damage from fitting or building work
  • Scratches and knife marks
  • Dents and gouges
  • Scorch marks from pans

Before booking anyone

  • How the colour is matched
  • What prep work is covered
  • What happens if the damage is worse than the pictures show
  • Who will actually do the work

Our hiring checklist

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Use a chopping board
  • Don’t knock pans against the edge
  • Don’t let water sit on joints
  • Wipe up spills quickly

Wipe water away from joints and around the sink, especially on laminate and wood.

Don’t leave damage by the sink, as water can get in and cause swelling.

Repairing versus replacing in Old Alresford

Replacing even one length of worktop means templating, cutting, fitting and frequently a new sink and hob connection. A repair is a few hours with everything left in place. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there’s no premium for Old Alresford. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Old Alresford

  • Rooms protected and left tidy
  • Same prices wherever you are
  • One-year guarantee on every repair
  • Colours mixed by hand to suit your surface

See our pricing.

Landlord and trade work in Old Alresford

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

FAQs for Old Alresford

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before.

How much do I need to move?

Only the area we’re working on. The rest is covered and protected.

Can you repair a burn in a worktop?

Generally. A photo lets us check what’s possible.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

What we cannot put right

It helps to know what we cannot do too:

  • Severe heat marks in quartz
  • Cracks right through stone that has moved
  • Laminate that has blown or swollen

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Solid surface (such as Corian)
  • Laminate
  • Quartz
  • Granite & marble
  • Solid wood
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.