Kent · England
Worktop repair in Oversland, Kent
Chip, burn and scratch repairs to kitchen and bathroom worktops at your home in Oversland, with a one-year guarantee on every repair.
- Repairs from £95
- Damage to a stone worktop
- Dents and gouges
Landlords, agents and businesses in Oversland
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
How we handle worktop repair in Oversland
We repair chips, burns and scratches in laminate, stone, quartz, solid surface and wooden worktops, matching the colour and pattern by hand. The worktop stays in place. If you’re dealing with snagging damage in a new kitchen and a chipped quartz edge, we can usually put it right, on laminate, solid surface (such as Corian) and quartz alike.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Oversland (ME13)
- Region
- Kent
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Through cracks in stone that is moving
- Laminate that has blown or swollen
- Severe heat marks in quartz
If in doubt, send pictures and we will say what we think.
What we work on
- Laminate
- Granite & marble
- Solid surface (such as Corian)
- Solid wood
- Quartz
Where we work around Oversland
Oversland is about 4 miles south-east of Faversham, in Kent. Wherever you are in the ME13 postcode area, we come to you. Oversland is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 48 miles away.
Every address in ME13 is within our area, from the main roads to the quietest streets. Streets in the area include Dunkirk Road and South Street. Neighbouring places we cover include Winterbourne (1 mile north-east), South Street (1 mile west), Hickmans Green (1 mile north), Neames Forstal (1 mile south-west) and Crouch (1 mile north-west). We also work in nearby towns such as Ashford (10 miles south), Canterbury (5 miles east), Sittingbourne (10 miles north-west), Whitstable (6 miles north-east), Faversham (4 miles north-west) and Herne Bay (10 miles north-east).
What’s near Oversland
Our clients here include homes close to The Sondes Arms, Church of St Peter and St Paul and Boughton-under-Blean and Dunkirk Primary School. The nearest railway station is Selling station, roughly 0.6 miles west. Other landmarks nearby include Eastbridge Hospital of St Thomas the Martyr (5.3 miles east) and Tower keep castle at Chilham (2.6 miles south). For a walk, there is Blean Woods RSPB Reserve.
What your worktop is made of matters
Solid surface
Solid surface tops are the same material all the way through, so marks can frequently be sanded and refinished.
Granite and stone
Granite and stone chip at edges and cut-outs. We fill and polish the repair to match the stone.
What affects the price in Oversland
Prices start from £95. You will know the full cost before you book. We take into account:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- The material
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Phone photos are fine. Ensure they show:
- Details of any past repairs
- Something in shot to show the size
- A photo taken from further back
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole worktop, we can price the job without visiting.
Signs you need worktop repair in Oversland
Around the sink, water gets into joints on laminate and wood, which can cause swelling.
Typical reasons for a call-out include:
- Dents and gouges
- Knife marks
- Snagging damage in a new kitchen
- A chipped edge
Questions to ask before booking
- Who will actually do the work
- What prep work is covered
- How your room will be protected
- Whether the colour is mixed to match
Places near Oversland
Other services in Oversland
How to care for the repair
Looking after the surface is easy:
- Don’t knock pans against the edge
- Oil wooden tops regularly
- Always use a trivet for hot pans
- Don’t cut directly on the worktop
Use chopping boards and trivets, wipe spills right away, and re-oil wooden worktops regularly.
Do not leave damage by the sink, as water can get in and cause swelling.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. Allow a few hours, depending on the damage, and we will tell you if anything changes.
- We protect the rest of the kitchen.
- The damage is cleaned and any loose material removed.
- We fill it and level it with the worktop.
- The colour and pattern are built up by hand.
- We seal and polish it to the right sheen.
Before we arrive
- Open a window if you can
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Your questions about worktop repair in Oversland
Do I need to clear the kitchen?
Just clear the area around the damage. The rest is covered and protected.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Are there extra charges for Oversland?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair a chipped quartz worktop?
Yes. We repair quartz chips regularly, filled and polished to match.
How do I get a price for worktop repair in Oversland?
Prices start from £95. We give a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
About our accreditations · Every repair comes with a one-year guarantee.
