Scottish Borders · Scotland

Worktop repair in Oxton, Scottish Borders

Worktop repair across Oxton and nearby, generally in one visit.

  • Repairs from £95
  • A chipped quartz edge
  • Chips near the sink
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair near Oxton

Worktop repair in Oxton, done in place

A damaged worktop doesn’t have to mean a new kitchen. The damage is filled and refinished so it blends into the pattern. Whether it’s damage to a stone worktop and chips on edges and corners, we can help.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Surface Doctor technician repairing a wooden kitchen worktop
Where
Oxton (TD2)
Area hub
Scottish Borders
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Questions from Oxton

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you price it without visiting?

In nearly every case. If photos do not show enough, we will ask for another angle.

Is a repair better than a new one?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Can you redo someone else’s repair?

Yes, we frequently do. It can add a little time, which we include in the quote.

What does worktop repair cost?

Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.

Do I need to empty the worktop?

Only the area we are working on. The rest is covered and protected.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

The process

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. Allow a few hours, and we’ll tell you if anything changes.

  1. We look at the damage and the worktop’s finish.
  2. We cut back any burnt or loose material.
  3. The area is filled and shaped.
  4. The pattern, flecks or grain are recreated.
  5. We finish it to match the sheen and leave it to cure.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Make sure the room can be ventilated
  • Point us to the nearest place to park

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the worktop, add your postcode and send them over. You will get a fixed quote, not an estimate.

Get a fixed price

Read more

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Keep joints and edges dry
  • Do not leave spills to soak in
  • Watch the edges with heavy pans
  • Always use a trivet for hot pans

Leave the repaired area free of hot or heavy items until it has cured. After that, trivets and chopping boards are your best protection.

A chip on an edge can grow, and water can reach the core of laminate. Repairing it early stops that.

Repairing versus replacing in Oxton

Replacing a worktop means removing the old one, cutting and fitting a new one and reconnecting the sink and hob, and it may not match the rest of the kitchen. Repairing the damage keeps your existing worktop. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why book with us

  • Straight answers about what a repair can do
  • No extra charge for your area
  • Most jobs done in one visit
  • A year’s guarantee on all work

See our prices page.

When to call us in Oxton

The worst damage frequently happens in a moment: a hot pan set straight down, or a heavy pan catching the edge. Scratches build up gradually from knives and grit.

Typical reasons for a call-out include:

  • Scratches and knife marks
  • A heat mark or burn
  • A damaged sink edge
  • Chips on edges and corners

Questions to ask before you book

  • How soon you can use it again
  • Is the price fixed, and does it include VAT?
  • The length of the guarantee and what it covers
  • Who will actually do the work

Our hiring checklist

Prices and what affects them

Prices start from £95. You’ll know the full cost before booking. We look at:

  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • How many areas need work
  • The material

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Quotes from your photos

Before you send pictures, these tips help us give you a firm price:

  • A clear, close picture of the problem area
  • The material, if you know it
  • Something in shot to show the size
  • Any earlier repairs or coatings

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Different materials, different repairs

Laminate

Laminate worktops have a printed decorative layer over a board core. Chips and burns are filled and the pattern recreated.

Solid surface

Solid surface materials are uniform throughout, so marks can often be sanded and refinished.

What a repair can’t fix

A repair isn’t right for every job, for example:

  • Laminate swollen by water from underneath
  • Discolouration deep in quartz
  • A cracked stone top that’s unsupported

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Oxton

  • Solid surface (such as Corian)
  • Laminate
  • Solid wood
  • Quartz
  • Granite & marble

Oxton and the surrounding area

Oxton is about 11 miles north of Galashiels, in the Scottish Borders. We visit clients in Oxton and nearby villages, so there is no workshop to go to. Oxton is one of 89 towns and villages in the Scottish Borders where we work. We work right across the region, from Oxton to Edinburgh (about 20 miles away).

Our technicians cover all of the TD2 postcode area and the streets around it. From Station Road, Main Street and The Row or a nearby road, we can come to you. We also cover the places around Oxton: Lauder (4 miles south-east), Fountainhall (5 miles south-west), Killochyett (6 miles south-west), Heriot (6 miles west) and Stow (6 miles south). Within a short drive, we also cover Galashiels (11 miles south), Selkirk (15 miles south), Innerleithen (15 miles south-west), Melrose (12 miles south), Earlston (10 miles south-east) and Langlee (11 miles south).

Landmarks near Oxton

Other landmarks nearby include Thirlestane Castle (4.1 miles south-east). Green spaces nearby include Addinston Hill.

Map of Oxton © OpenStreetMap contributors

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.