Kent · England
Worktop repair in Parkgate, Kent
We travel to Parkgate for chip, burn and scratch repairs to kitchen and bathroom worktops. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Scorch marks from pans
- Damage from fitting or building work
About our worktop repair in Parkgate
Worktops are expensive to replace and hard to match, especially in an L-shaped or long kitchen. Repairing the damage keeps your kitchen as it is. Typical jobs include a heat mark or burn and chips near the sink, on solid wood, laminate and granite & marble.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Parkgate (TN30)
- County
- Kent
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Even if you could get the same laminate, it may not match after years of light and use. A repair is matched to what you have now. Our worktop repair starts from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why book with us
- No extra charge for your area
- Free fixed quotes from pictures
- Work done at your home or business
- Most jobs done in one visit
Read our prices page.
Places near Parkgate
Other services in Parkgate
What worktop repair costs
Prices start from £95. You will not pay by the hour. The price is based on:
- What the surface is made of
- How much damage there is
- Previous DIY repairs that have to come out
- What kind of damage it is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole worktop
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- The material, if you know it
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We clean up when we are done and let you know when you can use it again.
- The area around the damage is protected.
- We clean the damage and remove anything loose.
- We fill it and level it with the worktop.
- The colour and pattern are built up by hand.
- We seal and polish it to the right sheen.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
- Mention any parking restrictions or tricky access
How to get a price
Email us pictures of the damage and one of the whole item, with your TN30 postcode, and we will reply with a fixed price.
Read more
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Water-swollen laminate
- Deep heat discolouration in quartz, which may not fully disappear
- A worktop that has moved because its support has failed
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Granite & marble
- Solid wood
- Laminate
- Solid surface (such as Corian)
- Quartz
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Do you need worktop repair in Parkgate?
Worktops take more punishment than anything else in the kitchen. Hot pans leave burns, knives cut, and heavy pans chip the edges.
These are the problems we’re asked about most:
- Damage from fitting or building work
- Damage around the sink cut-out
- A heat mark or burn
- Chipped corners
Before you book anyone
- How long it needs to cure
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
Materials and what they mean for the repair
Quartz
Quartz is crushed stone bound with resin. Edge chips are very common, and we fill and polish them to match the sheen.
Wood
Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.
Parkgate questions
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your pictures and you will get one combined price.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
What happens after I send photos?
We review the photos and send a fixed quote.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to Parkgate?
Yes. We work across the UK and come to Parkgate and the rest of Kent. Send us pictures for a fixed quote, or call 0345 017 0787.
Do I need to empty the worktop?
Just near the damage. The rest of the kitchen stays usable.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
What does worktop repair cost?
Prices start from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your TN30 postcode.
Where we work around Parkgate
Parkgate is about 10 miles south-west of Ashford, in Kent. Jobs in Parkgate are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We cover all 922 towns and villages across Kent, from the larger towns to small villages. You can also see our page for London, about 43 miles away.
Our repair technicians cover all of the TN30 postcode area. That includes homes on Cranbrook Road, Millpond Lane and Tenterden Road and the roads around them. We also cover the places around Parkgate: Clapper Hill (1 mile north-west), East End (1 mile west), Strood (2 miles south), Fosten Green (2 miles north-west) and London Beach (2 miles north-east). We also work in nearby towns such as Maidstone (14 miles north-west), Ashford (10 miles north-east), Foley Park (15 miles north), Paddock Wood (13 miles north-west), Bearsted (13 miles north) and Park Wood (12 miles north).
Near you in Parkgate
We visit homes around Wattle Wood and Homewood School, among other places. Further afield, we also cover the area around Mervyn Quinlan Museum (1.5 miles west) and Benenden Hospital (1.5 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
