Edinburgh · Scotland

Worktop repair in Queensferry, Edinburgh

Chip, burn and scratch repairs to kitchen and bathroom worktops at your home in Queensferry, with a one-year guarantee on every repair.

  • Repairs from £95
  • Chips near the sink
  • Dents and gouges
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair for Queensferry homes

Landlord and trade work in Queensferry

Landlords, letting agents and housing providers in Queensferry use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

Worktop repair in Queensferry, done in place

Each type of worktop needs a different approach: we fill and pattern laminate, fill and polish quartz and stone, and sand and refinish wood. The goal is always a repair that blends in. Typical jobs include a chipped edge and a heat mark or burn, on laminate, solid surface (such as Corian) and granite & marble.

We stand behind the work with a one-year guarantee.

Close-up of a technician filling damage on a solid wood worktop
Area
Queensferry (EH30, EH29)
Area hub
Edinburgh
Guarantee
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Signs you need worktop repair in Queensferry

Water around the sink can get into laminate and wood joints, and that can make them swell.

The things customers typically mention when they call are:

  • A chipped edge
  • Chips caused during installation
  • Damage to a stone worktop
  • Scorch marks from pans

Questions to ask before booking

  • If travel is included in the price
  • What the guarantee covers, and for how long
  • Who turns up on the day
  • Whether cleaning and preparation are in the price

Our hiring checklist

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Your questions about worktop repair in Queensferry

Can you match granite flecks?

We match colour, flecks and veining by hand, for a repair that blends in.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How do I get a price for worktop repair in Queensferry?

Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your EH30 postcode.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Do you work in Queensferry?

Yes. We work across the UK and travel to Queensferry. Send us pictures for a fixed quote, or call 0345 017 0787.

Will the price change on the day?

The price is fixed for what the photos show. If there’s more, we will tell you before starting.

How it works

Here’s how a visit generally runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a few hours, depending on the damage from start to finish. Before we go, we will explain when it can be used and how to look after it.

  1. We start by checking the damage and the worktop material.
  2. Next we clean up and prepare the damaged area.
  3. We fill the damage with a suitable filler and build up any lost edge.
  4. We match the colour and pattern by hand.
  5. Finally we seal or finish the area to match.

How to prepare

  • Have a window or extractor fan available
  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive

How to get a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Send photos for a quote

Related advice

Where we work around Queensferry

Queensferry is about 6 miles south of Dunfermline, in Edinburgh. Anywhere in EH30, we come to you. Our technicians cover all 175 towns and villages in Edinburgh, from the larger towns to small villages. Our jobs stretch from Queensferry to Edinburgh (about 8 miles away).

Jobs in EH30 and EH29 are booked in the same way as anywhere else. From High Street, Station Road and Borrowman Square or a nearby road, a technician can come to you. Being close to the A904 and B800, Queensferry is simple for us to get to. Close by, we cover Dalmeny (1 mile east), Lennie (3 miles south-east), Ingliston (3 miles south), Ratho Station (3 miles south) and Cammo (4 miles south-east). We also work in nearby towns such as Edinburgh (8 miles east), Leith (9 miles east), Bonnington (8 miles east), Greenside (8 miles east), Broughton (8 miles east) and Bellevue (8 miles east).

Near you in Queensferry

We visit homes around Queensferry High School and Queensferry Parish Church, among other places. For rail, the closest station is Dalmeny station, roughly 0.6 miles east. Nearby you’ll also find Inch Garvie (1.1 miles north) and Queensferry Museum (under half a mile north). Open spaces near Queensferry include Dundas Loch.

Map of Queensferry © OpenStreetMap contributors

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Keep joints and edges dry
  • Avoid harsh chemicals on stone and quartz
  • Keep wood oiled
  • Wipe up spills quickly

Wipe water away from joints and around the sink, especially on laminate and wood.

A chip on an edge can grow, and water can reach the core of laminate. An early repair prevents it.

Why repair rather than replace?

Replacing a worktop means removing the old one, templating and fitting a replacement and reconnecting the sink and hob, and matching the rest of the kitchen can be hard. Repairing the damage leaves the worktop in place. Our worktop repair starts from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Why book with us

  • A fixed quote before you book
  • Everything repaired in place
  • Rooms protected and left tidy
  • A year’s guarantee on all work

Read our prices page.

What your worktop is made of matters

Quartz

Quartz is crushed stone bound with resin. Edge chips are very common, and we fill and polish them to match the sheen.

Solid surface

Solid surface materials are uniform throughout, so scratches and burns can often be sanded out and refinished.

How we price worktop repair

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • How many items we do on one visit
  • How hard the colour is to match
  • How much damage there is
  • Previous DIY repairs that have to come out

Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

How to get a fixed price

We price nearly every job from pictures. This is what to send:

  • Where you are, by postcode
  • Any details about the material
  • A coin beside the damage so we can judge size
  • A photo taken from further back

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.