Wiltshire · England

Worktop repair in Townsend, Wiltshire

Chip, burn and scratch repairs to kitchen and bathroom worktops for homes and businesses in Townsend and across Wiltshire. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Dents and gouges
  • Chips on edges and corners
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair for Townsend homes

About our worktop repair in Townsend

Laminate, quartz, granite, solid surface and wooden worktops can all be repaired, matching the colour and pattern by hand. Nothing is taken out. We regularly repair solid surface (such as Corian), granite & marble and laminate, and common reasons people get in touch are burns from hot pans and cuts and scratches in the surface.

Whatever the size of the job, you get the same one-year guarantee in Townsend and across Wiltshire.

Location
Townsend (SN10)
County
Wiltshire
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: damaged granite tiles repaired in place

Landlords, agents and businesses in Townsend

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Common problems we fix in Townsend

Most chips are on edges and corners, often when something heavy catches the edge.

Look out for these signs:

  • A chipped quartz edge
  • A chipped edge
  • A heat mark or burn
  • A dent from a dropped pan

Comparing quotes

  • What happens if the damage is worse than the photos show
  • How your room will be protected
  • How to look after the finish
  • How the colour is matched

10 questions to ask before you book

Repairing versus replacing in Townsend

If the worktop is swollen by water or badly damaged along its length, replacement may be the answer. For chips, burns and scratches, a repair is the better value. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Why Townsend clients choose us

  • No extra charge for your area
  • Free fixed quotes from pictures
  • One visit for most repairs
  • CHAS and Constructionline accredited

Read our prices page.

Questions from Townsend

Can you price it without visiting?

Normally, yes. A close-up and a wider photo are enough to give a fixed quote.

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.

Can you match granite flecks?

Yes. We recreate the pattern by hand.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How do I get a price for worktop repair in Townsend?

Repairs from £95. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your SN10 postcode.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can a quartz edge be fixed?

Yes. The repair is colour matched and polished to the quartz’s finish.

Looking after it afterwards

Aftercare is simple:

  • Clean spills right away
  • Keep joints and edges dry
  • Don’t cut directly on the worktop
  • Steer clear of strong cleaners

Wipe water away from joints and around the sink, particularly with laminate and timber.

A burn or chip can get worse with daily use. Repairing it sooner keeps the job smaller.

Honest limits

A repair is not always the answer, and we will tell you before we start. Repairs will not solve:

  • A cracked stone top that is unsupported
  • Deep heat discolouration in quartz, which may not fully disappear
  • Laminate swollen by water from underneath

Send us pictures and we will tell you honestly.

Materials we work on in Townsend

  • Solid wood
  • Laminate
  • Granite & marble
  • Solid surface (such as Corian)
  • Quartz

Prices and what affects them

Prices start from £95. We do not charge extra for travel to Townsend. The price depends on:

  • How many items we do on one visit
  • What the surface is made of
  • How many areas need work
  • Access to the area

A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.

How to get a fixed price

You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:

  • Any details about the material
  • Something in shot to show the size
  • A picture taken from further back
  • Where you are, by postcode

For a price in Townsend, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

What we do, step by step

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.

  1. First we look at the damage and what the worktop is made of.
  2. We clean the area and prepare the edges of the damage.
  3. A filler that suits the material goes in, and missing edges are rebuilt.
  4. We match the colour and pattern by hand.
  5. Finally we seal or finish the area to match.

Preparing for the visit

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Open a window if you can

Get a quote

A quote takes minutes to ask for: photograph the damage, then the whole worktop, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed price

Read more

Townsend and the surrounding area

Townsend is about 3 miles south-west of Devizes, in Wiltshire. Across the SN10 area, we carry out the work at your property. We cover all 425 towns and villages in Wiltshire, from the larger towns to small villages. You can also see our page for Birmingham, about 79 miles away.

Postcode districts we cover here: SN10. We also cover the places around Townsend: Poulshot (1 mile north-east), Worton (1 mile south-east), Bulkington (1 mile west), Marston (1 mile south) and Seend (2 miles north-west). Further out, we also cover Trowbridge (7 miles west), Chippenham (9 miles north), Calne (8 miles north), Devizes (3 miles north-east), Westbury (8 miles south-west) and Melksham (4 miles north-west).

What’s near Townsend

Typical jobs here are in homes near Church of St Peter. Further afield, we also cover the area around Wiltshire Fire Defence And Brigades Museum (1.6 miles east) and Shane's Castle (2.6 miles north-east). For a walk, there’s King's Play Hill.

  • Local facilities include Kennet (2.9 miles north-east)
Map of Townsend © OpenStreetMap contributors

Materials and what they mean for the repair

Laminate

Laminate is a printed surface over a board. Chips and burns are filled and the pattern recreated by hand.

Wood

Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.