Shropshire · England

Worktop Repair in West Felton

Chip, burn and scratch repairs to kitchen and bathroom worktops for homes and businesses in West Felton and across Shropshire. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Cuts and scratches in the surface
  • Damage around the sink cut-out
Surface Doctor technician repairing a wooden kitchen worktop

Book worktop repair in West Felton

Worktop repair in West Felton, done in place

We repair chips, burns and scratches in laminate, stone, quartz, solid surface and wooden worktops, matching the colour and pattern by hand. Nothing is taken out. We work on quartz, solid surface (such as Corian) and laminate, and common reasons people contact us are a heat mark or burn and damage from fitting or building work.

You get a one-year guarantee, the same in West Felton as everywhere else we work.

Where
West Felton (SY11)
Region
Shropshire
Cover
12 months on all our work
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Close-up of a technician filling damage on a solid wood worktop

About West Felton

West Felton is about 4 miles south-east of Oswestry, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. West Felton is one of 433 places in Shropshire we cover. Our nearest city page is Liverpool, about 40 miles away.

Every address in SY11 is covered, from the main roads to the quietest streets. Streets in the area include Stone House Drive, Hicksons Lane and Holyhead Road, and we cover them all. Nearby, we also work in Twyford (1 mile north), Grimpo (1 mile north-east), Rednal (2 miles north-east), Babbinswood (3 miles north) and Welsh Frankton (5 miles north). Further out, we also cover Shrewsbury (12 miles south-east), Oswestry (4 miles north-west), Coleham (12 miles south-east), Kingsland (12 miles south-east), Belle Vue (13 miles south-east) and Monkmoor (12 miles south-east).

What’s near West Felton

Locally, our jobs take us to homes close to Church of St Michael, The Punch Bowl pub and West Felton CofE Primary School, among other places. A little further out are Wootton Castle (1.6 miles north) and Halston Hall (3.8 miles north).

Map of West Felton © OpenStreetMap contributors

When we would advise against a repair

Before you book, it’s worth knowing the limits:

  • Deep heat discolouration in quartz, which may not fully disappear
  • A worktop that has moved because its support has failed
  • Laminate swollen by water from underneath

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Laminate
  • Quartz
  • Granite & marble
  • Solid surface (such as Corian)
  • Solid wood

Questions from West Felton

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Do you come to West Felton?

Yes. We work across the UK and travel to West Felton. Send photos and we will quote, or call 0345 017 0787.

Are there extra charges for West Felton?

We don’t add a call-out fee. Your fixed price includes everything.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What your worktop is made of matters

Quartz

Quartz is tough, though edges can chip. We fill chips with a tinted resin and polish them.

Laminate

Laminate worktops have a printed decorative layer over a board core. Chips and burns are filled and the pattern recreated.

What worktop repair costs

Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:

  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • Access to the area
  • The material

The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.

Getting a price from photos

Most quotes are done from photos alone. To make it quick:

  • Something in shot to show the size
  • Natural light rather than flash
  • The material, if you know it
  • Any earlier repairs or coatings

Email us pictures of the damage and a wider shot of the entire item, with your SY11 postcode, and we will come back with a fixed quote.

Aftercare tips

Once the work has cured, treat it gently:

  • Wipe up spills quickly
  • Use a chopping board
  • Keep joints and edges dry
  • Keep wood oiled

Keep joints and the sink edge dry, especially on laminate and wood.

A chip on an edge can grow, and water can reach the core of laminate. An early repair prevents it.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Work for landlords and builders

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

What we are called out for in West Felton

Edges and corners chip most often, frequently when something heavy catches the edge.

Typical reasons for a call-out include:

  • A heat mark or burn
  • A dent from a dropped pan
  • Chipped corners
  • Damage to a stone worktop

Comparing quotes

  • How long it needs to cure
  • How the room is protected while they work
  • How changes to the job are handled
  • Who will actually do the work

Choosing a repair company

What we do, step by step

We turn up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.

  1. First, we check the damage and the finish we need to match.
  2. Burnt or loose material is cut back.
  3. The area is filled and shaped.
  4. The pattern, flecks or grain are recreated.
  5. We finish it to match the sheen and leave it to cure.

Preparing for the visit

  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park

Getting a price

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Send pictures for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.