Dorset · England

Worktop Repair in Wyke Regis

Worktop repair for Wyke Regis, without a refit. Get a fixed quote from your photos, then book a visit.

  • Repairs from £95
  • A dent from a dropped pan
  • Chips caused during installation
Surface Doctor technician repairing a wooden kitchen worktop

Worktop repair in Wyke Regis

Worktop repair at your home in Wyke Regis

Burns from hot pans, chips on edges and scratches from knives make up most of our worktop work. All are repaired in place. If you’re dealing with dents and gouges and chips caused during installation, we can help, whatever the material.

Every job is backed for twelve months. We return to put right any problem with the work.

Location
Wyke Regis (DT4)
Area hub
Dorset
Cover
One year on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Close-up of a technician filling damage on a solid wood worktop

Your questions about worktop repair in Wyke Regis

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Do I need to clear the kitchen?

Just near the damage. You can typically still use the rest of the kitchen.

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

How do I get a price for worktop repair in Wyke Regis?

Repairs from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.

Is there a call-out fee?

There is no separate call-out charge. The fixed price covers the visit and the work.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before.

What happens next?

We review the photos and send a fixed quote with dates.

How soon can you come?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Different materials, different repairs

Wood

Wooden worktops can be sanded, filled and re-oiled, and burns and dents repaired.

Quartz

Quartz worktops are mostly stone set in resin. We fill and polish chipped edges.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Should you replace it?

Stone and quartz have to be templated and cut, so replacing one section is a big job. Repairing it is a few hours’ work. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Wyke Regis. The job itself decides the price: how much damage, what it’s made of and how many items.

What you get with us

  • Colours mixed by hand to suit your surface
  • Accredited with CHAS, Constructionline and SafeContractor
  • No need to remove anything
  • Normally one visit, start to finish

Read our pricing.

When we would advise against a repair

A repair isn’t right for every job, for example:

  • Deep heat discolouration in quartz, which may not fully disappear
  • Laminate swollen by water from underneath
  • A worktop that has moved because its support has failed

Send us photos and we’ll tell you honestly.

What we work on

  • Solid surface (such as Corian)
  • Quartz
  • Laminate
  • Solid wood
  • Granite & marble

What we are called out for in Wyke Regis

Cut-outs for the sink and hob are the weakest parts, so cracks and chips frequently start there.

Look out for these signs:

  • Chips in quartz or granite
  • Chips near the sink
  • A heat mark or burn
  • A dent from a dropped pan

Questions to ask before booking

  • What prep work is covered
  • Whether the colour is mixed to match
  • Who turns up on the day
  • How changes to the job are handled

10 questions to ask before booking

The process

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We start by checking the damage and the worktop material.
  2. Next we clean up and prepare the damaged area.
  3. We fill with a filler suited to the material and rebuild any missing edge.
  4. We match the colour and pattern by hand.
  5. Finally we seal or finish the area to match.

How to prepare

  • Point us to the nearest place to park
  • Keep children and pets away from the room on the day
  • Have a window or extractor fan available

How to get a price

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Advice

How we price worktop repair

Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:

  • Any earlier repairs that need removing first
  • What the surface is made of
  • How hard the colour is to match
  • Where the damage is and how we get to it

Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Quotes from your pictures

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Something in shot to show the size
  • Natural light rather than flash
  • Any earlier repairs or coatings
  • A wider photo showing the entire worktop

Most clients in Wyke Regis get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Landlord and trade work in Wyke Regis

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Wyke Regis and the surrounding area

Wyke Regis is about 2 miles south of Weymouth, in Dorset. Jobs in Wyke Regis are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Wyke Regis is one of 462 places in Dorset where we work.

Here we cover the DT4 postcode area. Streets in the area include Dover Road, Stoke Road and South Road. Other places close to Wyke Regis include Castletown (2 miles south-east), Fortuneswell (3 miles south-east), Portland (3 miles south-east), Grove (4 miles south-east) and Easton (4 miles south-east). Within a short drive, we also cover Dorchester (8 miles north), Fordington (9 miles north), Wool (12 miles north-east), Broadwey (4 miles north), Littlemoor (4 miles north) and Charminster (10 miles north).

Landmarks near Wyke Regis

Locally, our jobs take us to homes close to All Saints Church of England School, Albert Inn and Nothe Gardens, among other places. Nearby too are Wyke Regis Methodist Church (less than half a mile north) and Wyke Regis Church of England Junior School (within half a mile north-west). The nearest railway station is Weymouth station, roughly 1.9 miles north-east. Other landmarks nearby include Weymouth and Portland (2 miles south-east) and Wyke Castle (within half a mile north-west). Open spaces near Wyke Regis include Radipole Lake and Jordan Hill.

Map of Wyke Regis © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.