Somerset · England
Worktop repair in Yenston, Somerset
Our technicians come to Yenston for chip, burn and scratch repairs to kitchen and bathroom worktops. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A dent from a dropped pan
- Scratches and knife marks

Worktop repair in Yenston without replacing anything
We repair worktops in place, with the rest of the kitchen protected. Most repairs take a few hours, and you can use the worktop again shortly afterwards. Our technicians work on quartz, laminate and solid surface (such as Corian), and the jobs we see most are chipped corners and scratches and knife marks.
Big or small, you get the same one-year guarantee.

- Where
- Yenston (BA8)
- Area hub
- Somerset
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
About Yenston
Yenston is about 11 miles east of Yeovil, in Somerset. Clients in Yenston get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.
All of BA8 is within our area, from the main roads to the quietest streets. That includes homes on High Street, Sally Lovell's Lane and Whitchurch Lane and the roads around them. Nearby, we also work in Templecombe (1 mile north-west), Henstridge Bowden (2 miles west), Purse Caundle (3 miles south-west), Milborne Port (3 miles south-west) and Milborne Wick (3 miles west). Further out, we also cover Yeovil (11 miles west), Shepton Mallet (15 miles north-west), Wincanton (5 miles north), Somerton (15 miles west), Castle Cary (9 miles north-west) and Preston Plucknett (12 miles west).
Local landmarks in Yenston
In Yenston, that means homes near Virgina Ash Hotel, Church of St Mary and St Nicholas CofE Primary School. Yenston’s nearest station is Templecombe station, about 0.9 miles north-west. Further afield, we also cover the area around Sherborne Old Castle (5 miles south-west).
Should you replace it?
Stone and quartz tops are templated and cut to fit, so replacing a section takes time and money. Repairing it is a few hours’ work. Our worktop repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why book with us
- One-year guarantee on every repair
- Colour-matched on site
- Nothing taken out or refitted
- Straight answers about what a repair can do
See our full price list.
Keeping it looking good
So the finish stays in good condition:
- Don’t cut directly on the worktop
- Clean spills immediately
- Do not let water sit on joints
- Keep a trivet by the hob
Use chopping boards and trivets, wipe up spills promptly, and keep wooden tops oiled.
Edge chips can get bigger, and on laminate, water can get into the core. Repairing it early stops that.
When to call us in Yenston
Worktops take more punishment than anything else in the kitchen. Hot pans leave burns, knives leave scratches, and edges chip when heavy pans or tins hit them.
These are the problems we’re asked about most:
- Burns from hot pans
- Damage from fitting or building work
- Chipped corners
- Dents and gouges
Comparing quotes
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- What aftercare is recommended
How we price worktop repair
Prices start from £95. We charge the same across the UK, including Yenston. What changes the price is:
- How easy the damage is to reach
- How hard the colour is to match
- The size and number of damaged areas
- What the surface is made of
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
When you take your pictures, these tips help us give you a firm price:
- Something in shot to show the size
- One sharp close-up of the damage
- The material, if you know it
- A wider photo showing the entire worktop
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.
- We protect the rest of the kitchen.
- We clean the damage and remove anything loose.
- It’s filled and levelled with the surface.
- We recreate the colour and pattern by hand.
- The repair is sealed and polished to match.
Before we arrive
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Let us know if it has been repaired before
Getting a price
Send us photos of the damage and a wider shot of the whole item, with your BA8 postcode, and we’ll reply with a fixed quote.
Read more
Materials and what they mean for the repair
Solid surface
Solid surface materials are uniform throughout, so scratches and burns can frequently be sanded out and refinished.
Wood
Wooden worktops can be sanded, filled and re-oiled, with burns and dents put right.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Discolouration deep in quartz
- A cracked stone top that’s unsupported
- Laminate swollen by water from underneath
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Granite & marble
- Laminate
- Solid wood
- Quartz
- Solid surface (such as Corian)
Your questions about worktop repair in Yenston
Do you repair quartz?
Yes. Chips on edges and around the sink are very common repairs, filled and polished to match.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you work in Yenston?
Yes, we do. Repair technicians travel to Yenston from across the region, with no extra charge for travel.
Can a scorch mark be fixed?
Often, yes. We remove the damaged surface, fill it and recreate the pattern.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Places near Yenston
What else we do in Yenston
About our accreditations · Every repair comes with a one-year guarantee.

