Wrexham · Wales
Bath Re-enamelling for Aber-oer homes
Full bath re-enamelling and resurfacing for homes and businesses in Aber-oer and across Wrexham. Free, fixed quotes from your photos.
- Resurfacing from £350
- Lots of chips and rust spots
- Worn patches where water runs and sits
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
How we handle bath re-enamelling in Aber-oer
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with a bath in a colour that no longer suits and wear marks under the taps, we can normally put it right, whatever the material.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Aber-oer (LL14)
- Area hub
- Wrexham
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aber-oer and the surrounding area
Aber-oer is about 4 miles west of Wrexham, in Wrexham. From the centre of Aber-oer to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Aber-oer is one of 115 towns and villages in Wrexham where we work. You can also see our page for Liverpool, about 26 miles away.
Our visits in LL14 are booked in the same way as anywhere else. We also travel to Llwyneinion (1 mile south), Talwrn (1 mile south-east), Ponciau (1 mile south-east), Pentre Bychan (1 mile south-east) and Coedpoeth (1 mile north). Within a short drive, we also cover Wrexham (4 miles east), Caia Park (4 miles east), Offa (3 miles east), Rhosddu (3 miles north-east), Acton (4 miles north-east) and Little Acton (4 miles north-east).
Local landmarks in Aber-oer
In Aber-oer, that means homes near Nant Mill, Church Of Saint Mary and Ysgol-Y-Grango and the streets around them. The nearest railway station is Wrexham Central station, about 2.9 miles east of the centre. Nearby you will also find Bersham Ironworks and Heritage Centre (1.2 miles east) and Cadwgan Castle (0.7 miles east). Open spaces near Aber-oer include Monks Pool and Bersham Bank.
Work for landlords and builders
For anyone letting property in or around Aber-oer, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in Wrexham and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What affects the price in Aber-oer
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- The size and number of damaged areas
- What the surface is made of
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Two or three clear photos are typically enough. Try to include:
- A close-up of the damage, in focus
- One picture of the entire bath
- The material, if you know it
- Daylight if possible, and no flash reflection
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Repairing versus replacing in Aber-oer
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why us?
- We leave the room as we found it
- A year’s guarantee on all work
- Free fixed quotes from pictures
- Work done at your home or business
Read our full price list and bath cost comparison.
Your questions about bath re-enamelling in Aber-oer
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you cover the entire of Wrexham?
Across the UK, so Aber-oer is covered. Prices do not change with location.
Do you charge for travel?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
When to call us in Aber-oer
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- An old resurfacing that’s failing
- Worn patches where water runs and sits
What your quote should include
- How the colour is matched
- A fixed price, and whether VAT is included
- What prep work is covered
- How changes to the job are handled
When we’d advise against a repair
A repair isn’t right for every job, for example:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Clear the area around the damage
Get a quote
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Places near Aber-oer
Other services in Aber-oer
About our accreditations · Every repair comes with a one-year guarantee.
