Wrexham · Wales
Bath re-enamelling & resurfacing in New Brighton, Wrexham
Problem with your bath in New Brighton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- A coloured bath you want in white
Your questions about bath re-enamelling in New Brighton
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Do you cover New Brighton?
We do. Repair technicians travel to New Brighton from across the region, with no extra charge for travel.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How much does bath re-enamelling cost in New Brighton?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your LL11 postcode.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
About our bath re-enamelling in New Brighton
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a coloured bath you want in white and lots of chips and rust spots, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Location
- New Brighton (LL11)
- Region
- Wrexham
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Our work in New Brighton
New Brighton is about 4 miles west of Wrexham, in Wrexham. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. We cover 115 places in Wrexham. Our jobs stretch from New Brighton to Liverpool (about 25 miles away).
Jobs in LL11 work the same way as everywhere else we cover. We also cover the places around New Brighton: Minera (1 mile north), Coedpoeth (1 mile east), Gegin (1 mile north), Fron (1 mile north-east) and Pentre Saeson (1 mile north). We also work in nearby towns such as Wrexham (4 miles east), Caia Park (5 miles east), Offa (3 miles east), Rhosllannerchrugog (3 miles south-east), Rhosddu (4 miles east) and Acton (4 miles east).
Local landmarks in New Brighton
Around New Brighton, we work in homes near City Arms, Minera Aided Primary School and Nant Mill. For rail, the closest station is Gwersyllt station, about 3.2 miles north-east. A little further out are Geological Museum of North Wales (1.7 miles north-west) and Tŷ Pawb (4 miles east). Green spaces nearby include Brymbo Pool and Pen-rhos.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
How the visit works
Arrival times are agreed in advance. Once we’re there, the work takes a full day in most cases. We leave the room clean.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
Get a quote
Send us pictures of the damage and one of the whole item, and tell us you’re in New Brighton, and we will reply with a fixed quote.
Related advice
Do you need bath re-enamelling in New Brighton?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
The things clients usually mention when they call are:
- A coating lifting around the plughole
- Several chips and rust patches
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
What to look for in a quote
- How the colour is matched
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- Aftercare advice
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including New Brighton. What changes the price is:
- Doing more than one item at once
- Access to the area
- Whether old repairs or coatings need taking off
- The material and finish
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
Phone photos are fine. Make sure they show:
- Any details about the material
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- A photo taken from further back
Most clients in New Brighton get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Landlords, agents and businesses in New Brighton
We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Other services in New Brighton
About our accreditations · Every repair comes with a one-year guarantee.
