Rhondda Cynon Taff · Wales
Bath re-enamelling & resurfacing in Aberaman North, Rhondda Cynon Taff
Damaged bath in Aberaman North? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, photos and access details.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Bath re-enamelling in Aberaman North without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean, on Victorian roll-tops, acrylic baths and basins & shower trays.
Whatever the size of the job, you get the same one-year guarantee in Aberaman North and across Rhondda Cynon Taff.
- Area
- Aberaman North (CF44)
- County
- Rhondda Cynon Taff
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Aberaman North
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Look out for these signs:
- Wear marks under the taps
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
Questions to ask before you book
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
- What prep work is covered
Looking after it afterwards
Once the work has cured, treat it gently:
- Get any chip repaired quickly
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Store bottles off the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
When a repair is not the answer
A repair is not right for every job, including:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Your questions about bath re-enamelling in Aberaman North
Can I get a quote without a visit?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
How much does bath re-enamelling cost in Aberaman North?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
What happens after I send photos?
We come back with a fixed quote, typically with dates to choose from. You are under no obligation.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Towns and villages near Aberaman North
Other services in Aberaman North
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
How to get a price
For a price in Aberaman North, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
What you get with us
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
- A year’s guarantee on all work
See our prices page or guide to resurfacing and replacement costs.
About Aberaman North
Aberaman North is about 1 mile south of Aberdare, in Rhondda Cynon Taff. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Our repair technicians cover 133 places across Rhondda Cynon Taff.
Every address in CF44 is within our area, from the main roads to the quietest streets. Jobs here include addresses on The Fairways and Tanyard Place and the roads around them. Other places close to Aberaman North include Cwmaman (1 mile south-east), Godreaman (1 mile east), Aberaman South (1 mile south-east), Abercwmboi (2 miles east) and Fernhill (2 miles east). Further out, we also cover Pontypridd (9 miles south-east), Mountain Ash (3 miles east), Tonypandy (6 miles south), Rhondda (4 miles south), Porth (6 miles south) and Church Village (11 miles south-east).
Local landmarks in Aberaman North
Our clients here include homes close to Blaengwawr Comprehensive School, Aberdare Park and Catholic Church of St Joseph, among other places. Also close by are The Globe Inn (0.8 miles south-east), St.John Baptist High School (1.2 miles north) and Cwmaman Primary (0.9 miles south). Aberaman North’s nearest station is Aberdare station, roughly 1.2 miles north-east of the centre. Nearby you’ll also find Cynon Valley Museum (1.3 miles north) and Ysbyty Cwm Cynon (2.7 miles east). Not far away are Cefnrhos-gwawr and Pwll Waun Cynon.
About our accreditations · Every repair comes with a one-year guarantee.
