Rhondda Cynon Taff · Wales
Bath re-enamelling & resurfacing in Fernhill, Rhondda Cynon Taff
Our technicians come to Fernhill for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Several chips and rust patches
Bath re-enamelling at your home in Fernhill
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our repair technicians work on acrylic baths, pressed steel baths and basins & shower trays, and common reasons people contact us are thin, worn enamel in places and an outdated colour you’d like to change.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Fernhill (CF44, CF45)
- Region
- Rhondda Cynon Taff
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We would rather lose a job than do one that will not last, so these are the limits:
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Nearby places to Fernhill
What else we do in Fernhill
Fernhill and nearby
Fernhill is about 2 miles north-west of Mountain Ash, in Rhondda Cynon Taff. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 133 towns and villages across Rhondda Cynon Taff, from the larger towns to small villages.
Jobs in CF44 and CF45 are booked in the same way as anywhere else. Local streets include Clos Afon, Ash Street and Elm Street, and we cover them all. If you are just outside Fernhill, we cover Abercwmboi (1 mile south-west), Aberaman South (1 mile south-west), Godreaman (1 mile west), Cwmaman (1 mile west) and Aberaman North (2 miles west). Larger places within reach include Pontypridd (7 miles south-east), Tonypandy (5 miles south), Rhondda (4 miles south-west), Porth (5 miles south), Church Village (9 miles south-east) and Tonyrefail (8 miles south).
Landmarks near Fernhill
Locally, our jobs take us to homes close to Bethesda Baptist Chapel, The Melbourne Star pub and Mountain Ash Comprehensive School and the streets around them. The closest station to Fernhill is Fernhill station, about 0.7 miles south-east of the centre. Well-known places in the area include Cynon Valley Museum (2.4 miles north-west) and Ysbyty Cwm Cynon (0.8 miles east). Open spaces near Fernhill include Pwll Waun Cynon and Coed Cae Aberaman.
- Local facilities include Mountain Ash (1.4 miles east)
Repairing versus replacing in Fernhill
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
See our pricing and resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Fernhill
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Look out for any of the following:
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A coating lifting around the plughole
- Several chips and rust patches
Comparing quotes
- Aftercare advice
- Who turns up on the day
- Whether cleaning and preparation are in the price
- If travel is included in the price
How to care for the repair
How the surface is treated afterwards matters:
- Avoid suction-cup mats
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
FAQs for Fernhill
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you come to Fernhill?
We do. We send a technician to Fernhill for every job, with no extra charge for travel.
Can I get a quote without a visit?
Usually, yes. Clear photos let us give you a fixed price without visiting.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Landlords, agents and businesses in Fernhill
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Fernhill. What changes the price is:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- What kind of damage it is
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- A wider photo showing the entire bath
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
