Rhondda Cynon Taff · Wales
Bath Re-enamelling in Aberaman
Fixed-price bath re-enamelling in Aberaman and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- Several chips and rust patches
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Bath re-enamelling in Aberaman without replacing anything
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Typical jobs include a bath in a colour that no longer suits and worn patches where water runs and sits, in acrylic baths, Victorian roll-tops and cast iron baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Aberaman (CF44)
- County
- Rhondda Cynon Taff
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
Aberaman questions
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Rhondda Cynon Taff.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
Repairing versus replacing in Aberaman
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why Aberaman clients choose us
- Free fixed quotes from pictures
- We leave the room as we found it
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
Read our pricing and resurfacing vs replacement cost guide.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Towns and villages near Aberaman
Other services in Aberaman
When to call us in Aberaman
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Common reasons people in Aberaman contact us are:
- A coloured bath you want in white
- Thin, worn enamel in places
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
Questions to ask before you book
- Who will actually do the work
- What happens if they find more damage
- How soon you can use it again
- A fixed price, and whether VAT is included
About Aberaman
Aberaman is about 1 mile south-east of Aberdare, in Rhondda Cynon Taff. Whether you are in the middle of Aberaman or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Aberaman is one of 133 places in Rhondda Cynon Taff we cover.
Postcode districts we cover here: CF44. Streets in the area include Jubilee Road, Cwmaman Road and Cardiff Road, and we cover them all. If you’re just outside Aberaman, we cover Davistown (1 mile north), Cwmbach (1 mile north-east), Aberdare (1 mile north-west), Foundry Town (1 mile north-west) and Aberdare East (1 mile north). Further out, we also cover Pontypridd (8 miles south-east), Mountain Ash (3 miles south-east), Tonypandy (6 miles south), Rhondda (4 miles south-west), Porth (6 miles south) and Church Village (10 miles south-east).
Landmarks near Aberaman
Around Aberaman, we work in homes near Blaengwawr Comprehensive School, St.John Baptist High School and Church of St Margaret of Antioch, among other places. Nearby too are Blaengwawr Primary School (less than half a mile north), The Penylan Inn (under half a mile north-east) and Aberdare Park (1.7 miles north-west). The nearest railway station is Cwmbach station, about 0.8 miles east. A little further out are Ysbyty Cwm Cynon (1.9 miles south-east) and Cynon Valley Museum (1.3 miles north-west). Not far away are Pwll Waun Cynon and Coed Cae Aberaman.
- Local facilities include Mountain Ash (2.6 miles south-east)
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Honest limits
It helps to know what we can’t do too:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
What affects the price in Aberaman
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Access to the area
- Whether we combine several jobs
- How many areas need work
- What the surface is made of
Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Phone pictures are fine. Just make sure we can see:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
