Monmouthshire · Wales
Bath re-enamelling & resurfacing in Abergavenny, Monmouthshire
Bath re-enamelling in Abergavenny without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
Bath re-enamelling in Abergavenny without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on cast iron baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about a roll-top that’s seen better days and several chips and rust patches.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Abergavenny (NP7)
- County
- Monmouthshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Abergavenny
Abergavenny (Welsh: Y Fenni) is about 12 miles north of Cwmbrân, in Monmouthshire. We travel to customers in Abergavenny, so there’s no workshop to go to. Abergavenny is one of 115 places in Monmouthshire where we work. You can also see our page for Birmingham, about 65 miles away.
We cover every part of NP7. Streets in the area include Market Street, High Street and Park Court, all of which we cover. You will find Abergavenny on the A40 and A4143, which makes it straightforward to reach. Other places close to Abergavenny include Pen-y-pound (1 mile west), Grofield (1 mile south-west), Cantref (1 mile west), Mardy (1 mile north) and Llanfoist (1 mile south-west). Within a short drive, we also cover Monmouth (13 miles east), Overmonnow (12 miles east), Usk (10 miles south-east), Gilwern (3 miles west), May Hill (13 miles east) and Pen-y-bont (4 miles west). Abergavenny is one of the larger places we cover in Monmouthshire.
Near you in Abergavenny
Locally, our jobs take us to homes close to The Bailey pub, King Henry VIII School Abergavenny and Linda Vista Gardens and the streets around them. Also close by are Church of Our Lady and St Michael (under half a mile west), King Henry VIII School Abergavenny (less than half a mile north-west) and Our Lady & St Michael's School (under half a mile west). The closest station to Abergavenny is Abergavenny station, about 0.7 miles south of the centre. Nearby you will also find Priory (within half a mile south-west) and Abergavenny Castle (0.5 miles south). Open spaces near Abergavenny include Ysgyryd Fach and White Castle moat.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Do you need bath re-enamelling in Abergavenny?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- An outdated colour you’d like to change
- A dull, rough surface that will not come clean
Before booking anyone
- How your room will be protected
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- How long the guarantee is and what it covers
How to look after the repair
Once the work has cured, treat it gently:
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Colour-matched on site
- Dust sheets down, tidy finish
- Nothing taken out or refitted
- Fixed prices from your pictures
Take a look at our prices page and guide to resurfacing and replacement costs.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
How to prepare
- Point us to the nearest place to park
- Let the surface dry out before the visit
- Make sure the room can be ventilated
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Places near Abergavenny
Also in Abergavenny
Your questions about bath re-enamelling in Abergavenny
What happens after I send photos?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How much does bath re-enamelling cost in Abergavenny?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you cover the whole of Monmouthshire?
The entire UK, including all of Monmouthshire. Send your postcode with your photos and we will confirm dates.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
About our accreditations · Every repair comes with a one-year guarantee.
