Monmouthshire · Wales
Bath re-enamelling & resurfacing in Pen-y-bont, Monmouthshire
Full bath re-enamelling and resurfacing for homes and businesses in Pen-y-bont and across Monmouthshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
Bath re-enamelling in Pen-y-bont, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with a bath in a colour that no longer suits and a bath that stays dull however much you clean it, we can typically put it right, whatever the material.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Pen-y-bont (NP7)
- Region
- Monmouthshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A bath that is rusted through
- Acrylic that moves when you stand in it
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Also near Pen-y-bont
What else we do in Pen-y-bont
Covering Pen-y-bont
Pen-y-bont is about 4 miles west of Abergavenny, in Monmouthshire. We visit homes and businesses in Pen-y-bont and the surrounding area, so nothing has to leave your home. Pen-y-bont is one of 115 places in Monmouthshire where we work. You can also see our page for Birmingham, about 68 miles away.
All of NP7 is within our area. From Back Road, Main Road and Church Road or a nearby road, a technician can come to you. Neighbouring places we cover include Maesygwartha (1 mile south-west), Llanelly (1 mile west), Glangrwyney (1 mile north), Cwm Siôn Mathew (1 mile south-west) and Cwrt y Gollen (1 mile north-west). Further out, we also cover Abergavenny (4 miles east), Pen-y-pound (3 miles east), Cantref (3 miles east), Grofield (3 miles east), Usk (12 miles south-east) and Llanfoist (3 miles east).
What’s near Pen-y-bont
Our customers here include homes close to Parish Church of St Elli, Gilwern C.P. School and The Corn Exchange Inn, among other places. The closest station to Pen-y-bont is Abergavenny station, roughly 4 miles east. Further afield, we also cover the area around Welsh Brigade Museum (1.4 miles north-west) and Gilwern Hospital (0.9 miles east). For a walk, there is Mynydd Llanwenarth and Pwll Gwy-rhoc.
- Other local spots include Llanwenarth Ultra (1.5 miles south-east)
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Common questions in Pen-y-bont
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send photos.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How do I get a price for bath re-enamelling in Pen-y-bont?
Prices start from £350. We give a fixed quote from your photos. Send a close-up and a photo of the whole item with your NP7 postcode.
Do you cover the whole of Monmouthshire?
All of Monmouthshire, and the rest of the UK. There is no extra charge for travel.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Looking after it afterwards
Looking after the surface is easy:
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs right away
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Everything repaired in place
- Every repair guaranteed for a year
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or guide to resurfacing and replacement costs.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Tell us if there are stairs or a lift
Getting a price
Upload pictures of the damage and a wider shot of the whole item, with your NP7 postcode, and we’ll reply with a fixed quote.
Read more
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Any earlier repairs that need removing first
- The type of damage
- How much damage there is
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Details of any past repairs
- The postcode, so we can plan the visit
- One picture of the entire bath
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say right away whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
