Shropshire · England
Bath re-enamelling & resurfacing in Adderley, Shropshire
Fixed-price bath re-enamelling in Adderley and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- Thin, worn enamel in places
Bath re-enamelling in Adderley, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on cast iron baths, basins & shower trays and pressed steel baths, and people most frequently call us about an old resurfacing that’s failing and worn patches where water runs and sits.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Adderley (TF9)
- Area hub
- Shropshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from photos. These are the things that affect it:
- The type of damage
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- Access to the area
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- A wider photo showing the entire bath
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
If you’re in Adderley and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Honest limits
Some jobs aren’t right for a repair, for example:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Towns and villages near Adderley
More services for Adderley
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Repair technicians who travel to you, UK-wide
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
Take a look at our full price list or bath cost comparison.
Adderley and the surrounding area
Adderley is about 4 miles north of Market Drayton, in Shropshire. Wherever you are in the TF9 postcode area, a technician comes to you. We work in all 433 towns and villages across Shropshire. We work right across the region, from Adderley to Liverpool (36 miles away).
Jobs in TF9 are booked in the same way as anywhere else. Whether you live on Station Road, Green Bank and Rectory Lane or anywhere nearby, we can come to you. If you are just outside Adderley, we cover Coxbank (1 mile north-west), Kinsey Heath (1 mile north), Swanbach (2 miles north), Brown's Bank (2 miles north-west) and Audlem (2 miles north). Further out, we also cover Market Drayton (4 miles south), Whitchurch (8 miles west), Wem (11 miles south-west), Loggerheads (5 miles south-east), Shawbury (13 miles south-west) and Prees Higher Heath (7 miles south-west).
Landmarks near Adderley
Around Adderley, we work in homes near Adderley CofE Primary School and St Peter's Church and the streets around them. Other landmarks nearby include Market Drayton Museum And Resource Centre (3.7 miles south).
Signs you need bath re-enamelling in Adderley
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Staining under the taps and around the waste
- A coating lifting around the plughole
Questions to ask before you book
- How your room will be protected
- What happens if the damage is worse than the pictures show
- What aftercare is recommended
- Whether the price is fixed and includes VAT
What happens on the day
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
FAQs for Adderley
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
About our accreditations · Every repair comes with a one-year guarantee.
