West Sussex · England
Bath re-enamelling & resurfacing in Adur, West Sussex
Bath re-enamelling across Adur and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in Adur
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair basins & shower trays, pressed steel baths and Victorian roll-tops, and the jobs we see most are chips and rust in more than one place and a coloured bath you want in white.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Adur (BN43, BN15)
- Area hub
- West Sussex
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
We will not take on work that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we will say what we think.
Materials we work on in Adur
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Nearby places to Adur
What else we do in Adur
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Get any chip repaired quickly
- Fix dripping taps quickly
- Wash away dyes and oils after use
- Respect the curing time we give you
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- How many areas need work
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- The material, if you know it
- Where you are, by postcode
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Adur customers choose us
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- Everything repaired in place
- A fixed quote before booking
See our prices page and bath cost comparison.
Landlords, agents and businesses in Adur
If you manage property in Adur, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What we do, step by step
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear the area around the damage
- Let us know about parking or access
- Tell us if there are stairs or a lift
How to get a price
For a price in Adur, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Your questions about bath re-enamelling in Adur
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you cover Adur?
We do. We send a technician to Adur for every job, and the price is the same as everywhere else.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you need bath re-enamelling in Adur?
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- Stains that won’t shift
- Chips and rust in more than one place
- A coating lifting around the plughole
Questions to ask before booking
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- When it can be used again
- What happens if the damage is worse than the photos show
Covering Adur
Adur is about 1 mile north-west of Shoreham-by-Sea, in West Sussex. Across the BN43 area, we carry out the work at your property. Our technicians cover 371 places in West Sussex, from the larger towns to small villages. We work right across the region, from Adur to London (45 miles away).
Every address in BN43 and BN15 is covered. From Steyning Road, Coombes Road and Mill Hill or anywhere nearby, we can come to you. Nearby, we also work in Old Shoreham (1 mile south), Shoreham-by-Sea (1 mile south-east), Castle Town (2 miles north), Kingston by Sea (2 miles east) and Southwick (3 miles south-east). Within a short drive, we also cover Horsham (15 miles north), Worthing (5 miles south-west), Haywards Heath (13 miles north-east), Burgess Hill (10 miles north-east), Littlehampton (11 miles west) and Rustington (10 miles west).
Landmarks near Adur
Locally, our jobs take us to homes close to Sussex Pad pub, The Sir Robert Woodard Academy and St Nicolas' Church. Adur’s nearest station is Shoreham-By-Sea station, roughly 1.5 miles south-east of the centre. Further afield, we also cover the area around Steyning Museum (2.9 miles north-west) and Old Castle (4.9 miles south-west). For a walk, there is Lancing Ring and Mill Hill.
About our accreditations · Every repair comes with a one-year guarantee.
