West Sussex · England
Bath Re-enamelling in Castle Town
Bath re-enamelling for Castle Town, without a refit. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- An old resurfacing that is failing
- Staining under the taps and around the waste
How we handle bath re-enamelling in Castle Town
We don’t move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the next day. We are frequently asked to fix several chips and rust patches and wear marks under the taps, in pressed steel baths, Victorian roll-tops and basins & shower trays.
You get a one-year guarantee, the same in Castle Town as everywhere else we work.
- Location
- Castle Town (BN44)
- County
- West Sussex
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Avoid suction-cup mats
- Do not use the bath until it has fully cured
- Repair dripping taps early
- Wash away dyes and oils after use
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Where we work around Castle Town
Castle Town is about 3 miles north of Shoreham-by-Sea, in West Sussex. Wherever you are in the BN44 postcode area, we carry out the work at your property. Castle Town is one of 371 places in West Sussex where we work. We work right across the region, from Castle Town to London (about 44 miles away).
Our visits in BN44 are booked in the same way as anywhere else. Streets in the area include Henfield Road, The Bostal and Shoreham Road, all of which we cover. We also travel to Adur (2 miles south), Old Shoreham (3 miles south), Shoreham-by-Sea (3 miles south), Fulking (3 miles east) and Kingston by Sea (4 miles south-east). Within a short drive, we also cover Horsham (13 miles north), Worthing (6 miles south-west), Haywards Heath (12 miles north-east), Burgess Hill (9 miles north-east), Littlehampton (11 miles south-west) and Lancing (4 miles south).
Landmarks near Castle Town
Our clients here include homes close to Upper Beeding Primary School, Steyning Grammar School and Hillside Park (parke sa Hiniusang Gingharian). Castle Town’s nearest station is Shoreham-By-Sea station, roughly 3.2 miles south. Further afield, we also cover the area around Southlands Hospital (3.1 miles south-east) and Steyning Museum (1.5 miles north-west). Open spaces near Castle Town include Mill Hill and Truleigh Hill.
Landlords, agents and businesses in Castle Town
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Most jobs done in one visit
- A fixed quote before you book
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
Take a look at our prices page and bath cost comparison.
Towns and villages near Castle Town
More services for Castle Town
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Common questions in Castle Town
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I get a price for bath re-enamelling in Castle Town?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you work in Castle Town?
We do. We send a technician to Castle Town for every job, and the price is the same as everywhere else.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you need bath re-enamelling in Castle Town?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted:
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- Wear marks under the taps
Questions to ask before booking
- What happens if they find more damage
- How your room will be protected
- Whether the colour is mixed to match
- If travel is included in the price
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Access to the area
- How many areas need work
- Previous DIY repairs that have to come out
- What kind of damage it is
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
How to get a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say immediately if a repair is the right fix.
Read more
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
