Angus · Scotland

Bath re-enamelling & resurfacing in Airlie, Angus

We travel to Airlie for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Airlie homes

How we handle bath re-enamelling in Airlie

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We regularly repair Victorian roll-tops, acrylic baths and cast iron baths, and people most frequently call us about a roll-top that’s seen better days and a dull, rough surface that won’t come clean.

You get a one-year guarantee, the same in Airlie as everywhere else we work.

Roll-top bath being refinished by a Surface Doctor technician
Location
Airlie (DD8)
Region
Angus
Warranty
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. We charge the same wherever you are, so there is no premium for Airlie. What changes the price is the job itself: the material, the amount of damage and how many items.

What you get with us

  • A fixed quote before you book
  • Rooms protected and left tidy
  • Every repair guaranteed for a year
  • Straight answers about what a repair can do

Read our pricing or bath cost comparison.

How the visit works

We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to look after it.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Clear the area around the damage
  • Ensure the area is dry

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.

Get a free quote

Advice

Airlie questions

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Is there any odour?

There may be a mild smell during the work, which fades afterwards.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.

Do you cover Airlie?

Yes, we do. Technicians travel to Airlie from across the region, with no extra charge for travel.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

What areas do you cover?

Everywhere in the UK, Airlie included. Travel is included in the price.

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Keeping it looking good

Much of the damage we repair could have been avoided. A few tips:

  • Dry the bath after use to stop limescale
  • Have chips seen to early
  • Wash away dyes and oils after use
  • Repair dripping taps early

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

When to call us in Airlie

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.

Contact us if you’ve noticed:

  • Staining under the taps and around the waste
  • A roll-top that is seen better days
  • Wear marks under the taps
  • A bath in a colour that no longer suits

Comparing quotes

  • Whether there are any call-out or travel charges
  • What prep work is covered
  • Aftercare advice
  • How your room will be protected

Choosing a repair company

Landlord and trade work in Airlie

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Housing associations and facilities teams use us for planned and reactive repairs in Angus and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Airlie and nearby

Airlie is about 9 miles west of Forfar, in Angus. Our technicians come to homes and businesses in Airlie and nearby villages, so there’s no workshop to go to. We cover all 40 towns and villages in Angus. You can also see our page for Edinburgh, about 48 miles away.

All of DD8 is within our area, from the main roads to the quietest streets. With the A926 close by, Airlie is simple for us to get to. We also cover the places around Airlie: Westmuir (3 miles north-east), Meigle (4 miles south-west), Alyth (5 miles west), Glamis (5 miles south-east) and Kirriemuir (5 miles north-east).

Landmarks near Airlie

We visit homes around Churchyard. A little further out are Baikie Castle (0.6 miles south). Open spaces near Airlie include Loch of Kinnordy and Mile Hill.

Map of Airlie © OpenStreetMap contributors

What bath re-enamelling costs

Resurfacing from £350. There is no charge for travel to Airlie. The price comes down to:

  • What the surface is made of
  • Access to the area
  • How much damage there is
  • Unusual colours or finishes

Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Quotes from your pictures

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • One sharp close-up of the damage
  • The material, if you know it
  • A coin or ruler next to the damage for scale
  • Where you are, by postcode

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

What we cannot put right

We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • A metal bath with a through crack
  • Steel that has corroded right through
  • Acrylic that moves when you stand in it

Send us photos and we will tell you honestly before you book.

Materials we work on in Airlie

  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.