Angus · Scotland
Bath Re-enamelling for Glamis homes
Full bath re-enamelling and resurfacing for homes and businesses in Glamis and across Angus. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Bath re-enamelling at your home in Glamis
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a peeling or bubbling previous coating and a bath that stays dull however much you clean it, on Victorian roll-tops, pressed steel baths and cast iron baths.
You get a one-year guarantee, the same in Glamis as everywhere else we work.
- Where
- Glamis (DD8)
- Area hub
- Angus
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What affects the price in Glamis
Resurfacing from £350. There is no area surcharge for Glamis. The price reflects:
- The material and finish
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The size and number of damaged areas
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Make sure the room can be ventilated
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
How to get a price
If you are in Glamis and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Our work in Glamis
Glamis is about 5 miles south-west of Forfar, in Angus. Clients in Glamis get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We cover all 40 towns and villages across Angus, from the larger towns to small villages. Our jobs stretch from Glamis to Edinburgh (46 miles away).
Here we cover the DD8 postcode area. Local streets include Main Street, Dundee Road and Strathmore Road. Close by, we cover Douglastown (2 miles east), Westmuir (4 miles north), Padanaram (4 miles north-east), Maryton (4 miles north) and Inverarity (4 miles east). Within a short drive, we also cover Forfar (5 miles north-east), Carnoustie (13 miles south-east), Kirriemuir (5 miles north), Hunter's Town (13 miles south-east), Gardynebourg (13 miles south-east) and West Haven (14 miles south-east).
Landmarks near Glamis
Around Glamis, we work in homes near St Fergus's Church, among other places. Further afield, we also cover the area around Glamis Castle (0.9 miles north) and Angus Folk Museum (under half a mile north). Open spaces near Glamis include Loch of Forfar and Gallow Hill.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
When to call us in Glamis
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Look out for these signs:
- An outdated colour you’d like to change
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
What your quote should include
- Aftercare advice
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
Glamis: your questions answered
What areas do you cover?
We work UK-wide, so Glamis is covered. Our prices are the same everywhere.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
How much does bath re-enamelling cost in Glamis?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Are there extra charges for Glamis?
There’s no separate call-out charge. The fixed price covers the visit and the work.
For landlords and businesses
Landlords, letting agents and housing providers in Glamis use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Places near Glamis
More services for Glamis
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
