Hertfordshire · England
Bath re-enamelling & resurfacing in Albury, Hertfordshire
Full bath re-enamelling and resurfacing at your home in Albury, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
Keeping it looking good
Looking after the surface is easy:
- Store bottles off the bath
- Never use suction bath mats
- Fix dripping taps quickly
- Do not use the bath until it has fully cured
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Bath re-enamelling at your home in Albury
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with an outdated colour you’d like to change and a dull, rough surface that won’t come clean, we can help, on Victorian roll-tops, cast iron baths and pressed steel baths alike.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Albury (SG11)
- Region
- Hertfordshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a full day, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let the surface dry out before the visit
- Let us know about parking or access
- Open a window if you can
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you are in Albury, and we’ll come back with a fixed quote.
Advice
Where we work around Albury
Albury is about 4 miles north-west of Bishop's Stortford, in Hertfordshire. Anywhere in SG11, we come to you. Albury is one of 381 places in Hertfordshire where we work. You can also see our page for London, about 29 miles away.
Postcode districts we cover here: SG11. If you are just outside Albury, we cover Gravesend (1 mile east), Clapgate (1 mile south-east), Furneux Pelham (1 mile north), Braughing (2 miles west) and Hay Street (3 miles west). Larger places within reach include Stevenage (11 miles west), Bishop's Stortford (4 miles south-east), Welwyn Garden City (14 miles south-west), Hitchin (15 miles west), Hoddesdon (12 miles south) and Cheshunt (15 miles south-west).
Local landmarks in Albury
Typical jobs here are in homes near Church of St Mary, The Catherine Wheel pub and Albury Church of England Voluntary Aided Primary School. The nearest railway station is Bishops Stortford station, roughly 4.5 miles south-east of the centre. Nearby you will also find Herts and Essex Hospital (4.9 miles south-east) and Bishops Stortford Local History Museum (3.5 miles south-east).
Signs you need bath re-enamelling in Albury
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for these signs:
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A coating lifting around the plughole
Before booking anyone
- What protection goes down before work starts
- The length of the guarantee and what it covers
- How changes to the job are handled
- How to look after the finish
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Towns and villages near Albury
What else we do in Albury
Common questions in Albury
Can you quote from photos?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
For landlords and businesses
We work for landlords, letting agents and housing providers in Albury as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- A fixed quote before you book
- Colours mixed by hand to suit your surface
Take a look at our full price list or bath cost comparison.
Honest limits
We won’t take on work that won’t last, so these are the limits:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
