Oxfordshire · England
Bath re-enamelling & resurfacing in Albury, Oxfordshire
Fixed-price bath re-enamelling in Albury and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits
When to call us in Albury
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Look out for any of the following:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
Before booking anyone
- How the colour is matched
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- Whether the price is fixed and includes VAT
Bath re-enamelling in Albury without replacing anything
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. We’re frequently asked to fix an old resurfacing that’s failing and a coloured bath you want in white, across pressed steel baths, basins & shower trays and acrylic baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Albury (OX9)
- County
- Oxfordshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Albury
Albury is about 4 miles west of Thame, in Oxfordshire. We visit clients in Albury, so there is no workshop to go to. Albury is one of 443 places in Oxfordshire where we work. Our nearest city page is London, about 44 miles away.
Our repair technicians cover all of the OX9 postcode area and the streets around it. Local streets include Oxford Road, Ickford Road and Albury View. If you’re just outside Albury, we cover Tiddington (1 mile west), Draycott (1 mile north-west), Milton Common (1 mile south), Little Ickford (1 mile north) and Shabbington (1 mile north-east). Within a short drive, we also cover Oxford (8 miles west), Didcot (12 miles south-west), Bicester (12 miles north), Abingdon-on-Thames (11 miles south-west), Thame (4 miles east) and Kidlington (11 miles north-west).
Around Albury
We visit homes around Church of St Helen and The Fox Inn. Nearby you’ll also find Waterperry Gardens Rural Museum (1.7 miles north-west) and Thame Community Hospital (3.6 miles east). Green spaces nearby include Wells Farm.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. We charge the same wherever you are, so there’s no premium for Albury. The job itself decides the price: the material, the amount of damage and how many items.
Why Albury customers choose us
- No extra charge for your area
- Usually one visit, start to finish
- Everything repaired in place
- One-year guarantee on every repair
Take a look at our full price list and bath cost comparison.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Let us know about parking or access
How to get a price
Most clients in Albury get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Landlord and trade work in Albury
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Albury
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Other services in Albury
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Common questions in Albury
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Do you come to Albury?
We do. We send a technician to Albury for every job, and the price is the same as everywhere else.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath re-enamelling cost in Albury?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the entire item and your postcode.
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Albury. What changes the price is:
- The material and finish
- The size and number of damaged areas
- How easy the damage is to reach
- The type of damage
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
We price nearly every job from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- Something in shot to show the size
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
