Northamptonshire · England
Bath re-enamelling & resurfacing in Alderton, Northamptonshire
Bath re-enamelling for Alderton, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A roll-top that is seen better days
- A coating lifting around the plughole
Your questions about bath re-enamelling in Alderton
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Alderton.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to Alderton?
Yes. We work across the UK and come to Alderton and the rest of Northamptonshire. Send us photos for a fixed quote, or call 0345 017 0787.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Bath re-enamelling in Alderton without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Typical jobs include an old resurfacing that’s failing and an original cast iron bath that needs restoring, in cast iron baths, basins & shower trays and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Alderton (NN12)
- Area hub
- Northamptonshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Alderton
Also in Alderton
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a full day. We clean up when we are done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Alderton. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Any earlier repairs that need removing first
- How much damage there is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- The material, if you know it
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the day after. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Technicians who travel to you, UK-wide
- Colour-matched on site
- Everything repaired in place
- Straight answers about what a repair can do
Take a look at our full price list and bath cost comparison.
Aftercare tips
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs right away
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
Send us pictures and we will tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Landlord and trade work in Alderton
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Alderton and the surrounding area
Alderton is about 3 miles east of Towcester, in Northamptonshire. We visit clients in Alderton and the surrounding area, so you do not need to take anything anywhere. We cover 364 places across Northamptonshire, from the larger towns to small villages. You can also see our page for Birmingham, about 48 miles away.
Jobs in NN12 work the same way as everywhere else we cover. We regularly work on streets such as Pury Road, Church Lane and Spring Lane. Nearby, we also work in Paulerspury (1 mile south-west), Stoke Bruerne (2 miles north), Pury End (2 miles south-west), Shutlanger (2 miles north) and Wood Burcote (3 miles west). Within a short drive, we also cover Northampton (9 miles north), Daventry (15 miles north-west), Brackley (11 miles south-west), Wolverton (6 miles south-east), Stony Stratford (5 miles south-east) and Moulton (12 miles north).
Near you in Alderton
Around Alderton, we work in homes near Church of St Margaret and Cambian Potterspury Lodge School, among other places. Open spaces near Alderton include Grafton Regis Meadow.
About our accreditations · Every repair comes with a one-year guarantee.
