Northamptonshire · England
Bath re-enamelling & resurfacing in Pury End, Northamptonshire
Fixed-price bath re-enamelling in Pury End and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- Wear marks under the taps
What we can’t put right
In fairness, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Bath re-enamelling in Pury End without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on pressed steel baths, cast iron baths and acrylic baths, and people most often call us about worn patches where water runs and sits and an original cast iron bath that needs restoring.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Pury End (NN12)
- County
- Northamptonshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Pury End
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- The material and finish
- How much damage there is
- What kind of damage it is
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- Details of any past repairs
- Natural light rather than flash
- A clear, close picture of the problem area
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Places near Pury End
Also in Pury End
Do you need bath re-enamelling in Pury End?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
The most common problems we’re called about are:
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Before you book anyone
- Whether the price is fixed and includes VAT
- If travel is included in the price
- How changes to the job are handled
- How soon you can use it again
Covering Pury End
Pury End is about 2 miles south-east of Towcester, in Northamptonshire. Jobs in Pury End are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We work in all 364 towns and villages across Northamptonshire. You can also see our page for Birmingham, about 47 miles away.
We cover every part of the NN12 postcode area. Local streets include Careys Road, Scriveners Lane and Lower Street. We also travel to Paulerspury (1 mile east), Wood Burcote (1 mile north-west), Towcester (2 miles north-west), Alderton (2 miles north-east) and Shutlanger (3 miles north). Within a short drive, we also cover Northampton (11 miles north), Daventry (14 miles north-west), Brackley (9 miles south-west), Wolverton (7 miles south-east), Stony Stratford (6 miles south-east) and Moulton (14 miles north).
Near you in Pury End
Around Pury End, we work in homes near Church of St James the Great, Sponne School and Paulerspury Church of England Primary School and the streets around them. Further afield, we also cover the area around The Silverstone Experience (3.1 miles south-west). The countryside around Pury End includes Stoke Bruerne Brick Pits.
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Landlords, agents and businesses in Pury End
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Pury End, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Pury End questions
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
What areas do you cover?
The entire UK, including all of Northamptonshire. Send your postcode with your photos and we’ll confirm dates.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
- We leave the room as we found it
- No extra charge for your area
Read our prices page or bath cost comparison.
The process
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear the area around the damage
- Let us know about parking or access
- Let the surface dry out before the visit
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
