Greater Manchester · England

Bath Re-enamelling for Alkrington homes

Fixed-price bath re-enamelling in Alkrington and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • An old resurfacing that is failing
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Alkrington

Bath re-enamelling in Alkrington without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s lots of chips and rust spots and a coating lifting around the plughole, we can help, on pressed steel baths, cast iron baths and basins & shower trays alike.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Roll-top bath being refinished by a Surface Doctor technician
Area
Alkrington (M24, M9, OL9)
County
Greater Manchester
Cover
One year on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Repair or replace in Alkrington?

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.

Why us?

  • Straight answers about what a repair can do
  • Every repair guaranteed for a year
  • Accredited with CHAS, Constructionline and SafeContractor
  • Colours mixed by hand to suit your surface

Read our full price list or bath cost comparison.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.

Keeping it looking good

Aftercare is simple:

  • Never use suction bath mats
  • A quick wipe after use keeps limescale away
  • Use washing-up liquid and a soft cloth
  • Get any chip repaired quickly

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

For landlords and businesses

For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.

FAQs for Alkrington

What information do you need?

Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Which areas do you work in?

We work UK-wide, so Alkrington is covered. Our prices are the same everywhere.

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

Is the work guaranteed?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Can you price it without visiting?

Normally, yes. Clear pictures let us give you a fixed price without visiting.

Is there a call-out fee?

There’s no separate call-out charge. The fixed price covers the visit and the work.

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Holes rusted through the metal
  • Acrylic that moves when you stand in it
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we will say what we think before booking.

Materials we work on in Alkrington

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops

How it works

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Let us know which floor the room is on
  • Let the surface dry out before the visit
  • Plan for the room to be out of bounds to pets and children

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Read more

When to call us in Alkrington

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

You may need us if you’ve spotted any of these:

  • An original cast iron bath that needs restoring
  • Brown or grey marks that don’t clean off
  • An old resurfacing that is failing
  • An outdated colour you’d like to change

Comparing quotes

  • How changes to the job are handled
  • Whether the colour is mixed to match
  • What aftercare is recommended
  • The length of the guarantee and what it covers

Choosing a repair company

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Alkrington and the surrounding area

Alkrington is about 1 mile south of Middleton, in Greater Manchester. Wherever you are in the M24 postcode area, we carry out the work at your property. Our repair technicians cover all 72 towns and villages across Greater Manchester.

Every address in M24, M9 and OL9 is covered. Jobs here include addresses on Moss Lane, Manor Road and Mount Road. Neighbouring places we cover include Greengate (1 mile south-east), Tonge (1 mile north), Firwood Park (1 mile north-east), Middleton (1 mile north) and Mills Hill (1 mile north-east). Further out, we also cover Manchester (4 miles south), Wythenshawe (11 miles south), Northern Quarter (4 miles south-west), Old Trafford (6 miles south-west), Chinatown (5 miles south-west) and Ancoats (4 miles south-west).

What’s near Alkrington

In Alkrington, that means homes near The Gardeners Arms, Church of St Leonard and Alkrington Primary School, among other places. Also close by are St Michael's Church (0.7 miles north), Wince Brook Park (under half a mile north-east), Plant Hill Arts College (1.5 miles west) and Co-op Academy North Manchester (0.7 miles south). The closest station to Alkrington is Mills Hill station, about 1.2 miles north-east of the centre. Nearby you will also find Booth Hall Children's Hospital (1.2 miles south-west) and Manchester Castle (4.1 miles south-west). The countryside around Alkrington includes Tandle Hill and Boating lake.

Map of Alkrington © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.