Northumberland · England
Bath Re-enamelling for Allendale Town homes
Full bath re-enamelling and resurfacing at your home in Allendale Town, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We look at:
- How many areas need work
- The material
- The type of damage
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- One picture of the entire bath
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Bath re-enamelling at your home in Allendale Town
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a bath that stays dull however much you clean it and worn patches where water runs and sits, in basins & shower trays, acrylic baths and cast iron baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Location
- Allendale Town (NE47)
- Area hub
- Northumberland
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Allendale Town
Also in Allendale Town
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes the best part of a day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Advice
Landlord and trade work in Allendale Town
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Allendale Town: your questions answered
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
What areas do you cover?
Everywhere in the UK, Allendale Town included. There’s no extra charge for travel.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Repair or replace in Allendale Town?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the next day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Allendale Town. The job itself decides the price: the material, the amount of damage and how many items.
Why Allendale Town customers choose us
- Typically one visit, start to finish
- One-year guarantee on every repair
- Work done at your home or business
- Nothing taken out or refitted
Take a look at our pricing or bath cost comparison.
When we’d advise against a repair
A repair is not right for every job, for example:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think.
Materials we work on in Allendale Town
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Allendale Town and the surrounding area
Allendale Town is about 17 miles west of Consett, in Northumberland. We travel to customers in Allendale Town, so there is no workshop to go to. We work in 189 places across Northumberland. Our nearest city page is Newcastle upon Tyne, about 25 miles away.
We work across NE47 and the streets around it. You will find streets such as Lonkley Terrace, Selah Close and Allenfields, all of which we cover. Main roads around Allendale Town include the B6303, so getting to you is simple. Neighbouring places we cover include Catton (1 mile north-west), Bearsbridge (3 miles west), Haydon Bridge (5 miles north), Chesterwood (6 miles north) and Low Gate (6 miles north-east). Within a short drive, we also cover Hexham (8 miles north-east), Haltwhistle (10 miles north-west), Corbridge (11 miles north-east) and Stocksfield (14 miles east).
What’s near Allendale Town
In Allendale Town, that means homes near Golden Lion Hotel, Church of St Cuthbert and Allendale Primary School. A little further out are Langley Castle (4.1 miles north) and Museum of Classic Sci-Fi (within half a mile south-west). Open spaces near Allendale Town include Allendale Co-operative Society.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Don’t let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Have chips seen to early
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
