Northumberland · England
Bath Re-enamelling in Bearsbridge
Full bath re-enamelling and resurfacing in Bearsbridge, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- An old resurfacing that’s failing
Bath re-enamelling in Bearsbridge, done in place
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Whether it’s chips and rust in more than one place and stains that won’t shift, we can help, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Bearsbridge (NE47)
- Area hub
- Northumberland
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
It helps to know what we cannot do:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Aftercare tips
Once the work has cured, treat it gently:
- Never use suction bath mats
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- The colour and finish to match
- The material
- What kind of damage it is
- Previous DIY repairs that have to come out
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- Whether it’s been repaired or coated before
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Nearby places to Bearsbridge
More services for Bearsbridge
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Repair or replace in Bearsbridge?
A replacement frequently means several trades over several days. Resurfacing takes one technician and usually a day. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
What you get with us
- A fixed quote before you book
- One price list for the entire UK
- A year’s guarantee on all work
- We leave the room as we found it
Take a look at our prices page or bath cost comparison.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How it works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Open a window if you can
- Mention any earlier repairs or resurfacing
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Advice
FAQs for Bearsbridge
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
What areas do you cover?
All of Northumberland, and the rest of the UK. There is no extra charge for travel.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
When to call us in Bearsbridge
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.
Keep an eye out for these signs:
- Brown or grey marks that do not clean off
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
Questions to ask before you book
- How long the guarantee is and what it covers
- What protection goes down before work starts
- How soon you can use it again
- Whether a trained technician does the job
About Bearsbridge
Bearsbridge is about 10 miles south-west of Hexham, in Northumberland. Wherever you are in the NE47 postcode area, we carry out the work at your property. We work in all 189 towns and villages across Northumberland, from the larger towns to small villages. Our jobs stretch from Bearsbridge to Newcastle upon Tyne (28 miles away).
All of NE47 is covered, from the main roads to the quietest streets. Other places close to Bearsbridge include Catton (3 miles east), Allendale Town (3 miles east), Bardon Mill (4 miles north), Redburn (4 miles north) and Henshaw (5 miles north). Further out, we also cover Hexham (10 miles north-east), Haltwhistle (6 miles north-west) and Corbridge (14 miles east).
What’s near Bearsbridge
Around Bearsbridge, we work in homes near Elks Head pub, Whitfield CofE Primary School and Church of the Holy Trinity, among other places. For rail, the closest station is Bardon Mill station, about 4.3 miles north of the centre. Nearby you will also find Langley Castle (4.4 miles north-east) and Museum of Classic Sci-Fi (3.4 miles east). Not far away are Allendale Co-operative Society.
About our accreditations · Every repair comes with a one-year guarantee.
