Northumberland · England
Bath Re-enamelling for Corbridge homes
We travel to Corbridge for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Wear marks under the taps
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Straight answers about what a repair can do
- No need to remove anything
- Rooms protected and left tidy
- We come to you, anywhere in the UK
Read our prices page and resurfacing vs replacement cost guide.
How we handle bath re-enamelling in Corbridge
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We work on cast iron baths, basins & shower trays and pressed steel baths, and people most often call us about an outdated colour you’d like to change and a peeling or bubbling previous coating.
All our work is covered by our one-year guarantee.
- Area
- Corbridge (NE45)
- Region
- Northumberland
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Corbridge
We work for landlords, letting agents and housing providers in Corbridge as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How it works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Open a window if you can
Get a quote
If you are in Corbridge and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Any earlier repairs that need removing first
- The material and finish
- Access to the area
- How much damage there is
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
Photographing the damage takes a minute. Please include:
- A close-up of the damage, in focus
- Something in shot to show the size
- One picture of the entire bath
- Your postcode, so we can check dates
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Towns and villages near Corbridge
Also in Corbridge
Covering Corbridge
Corbridge is about 11 miles north-west of Consett, in Northumberland. We visit homes and businesses in Corbridge and the surrounding area, so there is no workshop to go to. Corbridge is one of 189 places in Northumberland where we work. You can also see our page for Newcastle upon Tyne, about 15 miles away.
Here we cover the NE45 postcode area. Jobs here include addresses on Station Road, St Helen's Lane and Synclen Avenue. Main roads around Corbridge include the A695 and B6321, which makes travel easy. If you are just outside Corbridge, we cover Oakwood (3 miles west), Riding Mill (3 miles south-east), Bridge End (3 miles west), Hexham (4 miles west) and Great Whittington (4 miles north). Within a short drive, we also cover Prudhoe (7 miles east), Ponteland (11 miles north-east), Haydon Bridge (9 miles west), Wylam (8 miles east) and Stocksfield (5 miles south-east).
Near you in Corbridge
Our customers here include homes close to The Golden Lion Public House, Dilston College and Corbridge Church of England Aided First School, among other places. The closest station to Corbridge is Corbridge station, about 0.8 miles south. Nearby you will also find Hexham General Hospital (3.2 miles west) and Aydon Castle (1.1 miles north-east).
Corbridge questions
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What we are called out for in Corbridge
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- An old resurfacing that is failing
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
Comparing quotes
- The length of the guarantee and what it covers
- Whether the price covers travel
- Who will actually do the work
- When it can be used again
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
