Ceredigion · Wales

Bath Re-enamelling for Alltyblaca homes

Bath re-enamelling in Alltyblaca without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Alltyblaca?

Bath re-enamelling in Alltyblaca without replacing anything

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and people most often call us about enamel that’s lost its shine and feels rough and lots of chips and rust spots.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.

Technician in a mask working on a freestanding roll-top bath
Where
Alltyblaca (SA40)
Area hub
Ceredigion
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

Keeping it looking good

To keep it looking its best for years:

  • Stick to gentle, non-abrasive cleaners
  • Respect the curing time we give you
  • Do not let dyes or oils sit on the finish
  • Keep toiletries on a shelf rather than in the bath

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Do not try to scrub a worn bath back to shine. It removes more of the surface.

Common problems we fix in Alltyblaca

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Look out for any of the following:

  • A peeling or bubbling previous coating
  • A period or roll-top bath worth keeping
  • Brown or grey marks that don’t clean off
  • Chips and rust in more than one place

Before you book anyone

  • How changes to the job are handled
  • How long it needs to cure
  • Whether the price covers travel
  • Whether they match the colour on site

How to compare quotes

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the following day, the bath is ready.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Mention if the room is upstairs or in a flat
  • Have somewhere for us to park nearby if possible

How to get a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Send pictures for a quote

Read more

Where we work around Alltyblaca

Alltyblaca is about 17 miles north of Carmarthen, in Ceredigion. We visit customers in Alltyblaca, so you do not need to take anything anywhere. Our technicians cover all 125 towns and villages across Ceredigion.

Postcode districts we cover here: SA40. Nearby, we also work in Alltyblacca (1 mile south), Llanybydder (1 mile south), Pencarreg (1 mile east), Glanduar (1 mile south-east) and Llanwnnen (2 miles north-east). We also work in nearby towns such as Aberaeron (12 miles north), Lampeter (4 miles north-east), New Quay (12 miles north-west) and Llandysul (7 miles south-west).

What’s near Alltyblaca

In Alltyblaca, that means homes near Church of St Peter and Black Lion Hotel and the streets around them. Nearby you will also find Castell Dol Wllf (under half a mile south) and Welsh Quilt Centre (3.9 miles north-east). The countryside around Alltyblaca includes Pen y Gaer and Gorsgoch Lake.

Map of Alltyblaca © OpenStreetMap contributors

When a repair is not the answer

To be straight with you, there are a few things a repair won’t fix:

  • An acrylic bath that flexes badly underfoot
  • Leaking taps or wastes (a plumber’s job)
  • Problems we can’t see until an old finish comes off

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Alltyblaca

  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Repairing versus replacing in Alltyblaca

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why choose Surface Doctor in Alltyblaca

  • CHAS and Constructionline accredited
  • Colour mixed on the day to match
  • We come to you, anywhere in the UK
  • Honest advice, even when it means no job

Take a look at our full price list or bath cost comparison.

Landlord and trade work in Alltyblaca

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Questions from Alltyblaca

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Ceredigion.

Is there a smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

Can you redo someone else’s repair?

Yes, we often do. Removing the old work can add time, and that is in the quote.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you come to Alltyblaca?

Yes. We cover the entire UK and travel to Alltyblaca and the rest of Ceredigion. Send us photos for a fixed quote, or call 0345 017 0787.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.