Lancashire · England
Bath re-enamelling & resurfacing in Anderton, Lancashire
Full bath re-enamelling and resurfacing in Anderton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- An outdated colour you’d like to change
How we handle bath re-enamelling in Anderton
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. We’re frequently asked to fix a roll-top that’s seen better days and brown or grey marks that don’t clean off, across acrylic baths, Victorian roll-tops and basins & shower trays.
All our work comes with a one-year guarantee.
- Location
- Anderton (PR6, PR7, BL6)
- Area hub
- Lancashire
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Anderton?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
People typically call us after spotting something like this:
- Worn patches where water runs and sits
- A coating lifting around the plughole
- Staining under the taps and around the waste
- A roll-top that’s seen better days
What your quote should include
- Who turns up on the day
- What happens if they find more damage
- How the room is protected while they work
- Whether there are any call-out or travel charges
Landlord and trade work in Anderton
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
We work for landlords, letting agents and housing providers in Anderton as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Anderton questions
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We give you timings with the quote.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair won’t do:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Nearby places to Anderton
More services for Anderton
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Make sure the area is dry
- Point us to the nearest place to park
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Read more
Anderton and nearby
Anderton is about 1 mile south-east of Adlington, in Lancashire. We travel to customers in Anderton, so you don’t need to take anything anywhere. We work in 482 places across Lancashire, from the larger towns to small villages. We work right across the region, from Anderton to Manchester (18 miles away).
All of PR6, PR7 and BL6 is covered. Jobs here include addresses on Lees Road, Huyton Road and Bolton Road and the roads around them. We also travel to Grimeford Village (1 mile east), Rivington (1 mile north-east), Montcliffe (3 miles east), Wallsuches (3 miles east) and Heapey (4 miles north). Within a short drive, we also cover Preston (11 miles north), Chorley (3 miles north-west), Bamber Bridge (8 miles north), Accrington (13 miles north-east), Leyland (7 miles north-west) and Fulwood (13 miles north-west).
Local landmarks in Anderton
Around Anderton, we work in homes near Rivington and Blackrod High School, St Paul's Church and St Joseph's Catholic Primary School, among other places. The nearest railway station is Adlington (Lancashire) station, roughly 0.5 miles west. Further afield, we also cover the area around Chorley and South Ribble District General Hospital (4.1 miles north-west) and Blackrod Castle Croft (1.6 miles south). The countryside around Anderton includes Noon Hill.
Why repair rather than replace?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. We charge the same wherever you are, with no extra for Anderton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Anderton clients choose us
- Colour mixed on the day to match
- Repair technicians who travel to you, UK-wide
- Normally one visit, start to finish
- No need to remove anything
See our pricing and resurfacing vs replacement cost guide.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Anderton. The price depends on:
- Unusual colours or finishes
- How many areas need work
- Where the damage is and how we get to it
- The material
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
When you take your pictures, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
