Bolton · England
Bath Re-enamelling in Montcliffe
Fixed-price bath re-enamelling in Montcliffe and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- Thin, worn enamel in places
Bath re-enamelling in Montcliffe without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include lots of chips and rust spots and a bath that stays dull however much you clean it, across acrylic baths, Victorian roll-tops and cast iron baths.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Location
- Montcliffe (BL6)
- Area hub
- Bolton
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Montcliffe. What changes the price is:
- Any earlier repairs that need removing first
- Access to the area
- How hard the colour is to match
- The size and number of damaged areas
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
Upload a picture of the damage and one of the whole item, and tell us you are in Montcliffe, and we’ll come back with a fixed quote.
Common questions in Montcliffe
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work in Montcliffe?
Yes. We work across the UK and come to Montcliffe. Send photos and we’ll quote, or call 0345 017 0787.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Which areas do you work in?
Across the UK, so Montcliffe is covered. Prices do not change with location.
Towns and villages near Montcliffe
What else we do in Montcliffe
Aftercare tips
Aftercare is simple:
- Dry the bath after use to stop limescale
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
For landlords and businesses
If you manage property in Montcliffe, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Colour mixed on the day to match
- Most jobs done in one visit
- Fixed prices from your pictures
- Straight answers about what a repair can do
Take a look at our pricing or bath cost comparison.
Covering Montcliffe
Montcliffe is about 1 mile north-east of Horwich, in Bolton. Across the BL6 area, we carry out the work at your property. We cover 61 places in Bolton, from the larger towns to small villages. Our nearest city page is Manchester, about 15 miles away.
Our visits in BL6 are booked in the same way as anywhere else. You’ll find streets such as George's Lane and Marklands Road, and we cover them all. If you are just outside Montcliffe, we cover Wallsuches (1 mile south), Rivington (2 miles north-west), Grimeford Village (2 miles west), Anderton (3 miles west) and Heapey (6 miles north-west). Larger places within reach include Bolton (4 miles south-east), Halliwell (3 miles east), Farnworth (6 miles south-east), Westhoughton (4 miles south), Daubhill (4 miles south-east) and Great Lever (5 miles south-east).
Near you in Montcliffe
We visit homes around Holy Trinity Church, Rivington and Blackrod High School and Horwich Parish CofE Primary School. The nearest railway station is Horwich Parkway station, roughly 2 miles south of the centre. Nearby you’ll also find Blackrod Castle Croft (2.4 miles south-west) and Bolton Steam Museum (3.2 miles south-east). Not far away are Noon Hill.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Have a window or extractor fan available
- Let us know about parking or access
- Ensure the area is dry
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
