Lancashire · England
Bath Re-enamelling for Leyland homes
Full bath re-enamelling and resurfacing for homes and businesses in Leyland and across Lancashire. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that won’t shift
About our bath re-enamelling in Leyland
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include a bath in a colour that no longer suits and a peeling or bubbling previous coating, in pressed steel baths, Victorian roll-tops and basins & shower trays.
All our work is covered by our one-year guarantee.
- Area
- Leyland (PR25, PR26)
- County
- Lancashire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
The process
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the room can be ventilated
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Honest limits
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Your questions about bath re-enamelling in Leyland
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Our work in Leyland
Leyland is about 5 miles south of Preston, in Lancashire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 482 places across Lancashire, from the larger towns to small villages. We work right across the region, from Leyland to Liverpool (22 miles away).
Jobs in PR25 and PR26 are booked in the same way as anywhere else. That includes homes on Church Road, Sumner Street and Forge Street. Being close to the A49 and A5083, Leyland is easy for our technicians to reach. We also cover the places around Leyland: Clayton-le-Woods (1 mile east), Runshaw Moor (2 miles south), Buckshaw Village (2 miles south-east), Euxton (2 miles south-east) and Whittle-le-Woods (3 miles east). Larger places within reach include Preston (5 miles north), Chorley (4 miles south-east), Lytham St Anne's (13 miles west), Bamber Bridge (3 miles north-east), Accrington (14 miles east) and Fulwood (6 miles north). Leyland is one of the larger places we cover in Lancashire.
Near you in Leyland
Typical jobs here are in homes near Worden Park, Wellfield High School and Leyland St Mary's Roman Catholic Primary School, among other places. You’ll also find The Leyland Lion pub (less than half a mile north-east) and St Andrew's Church (under half a mile south). The nearest railway station is Leyland station, roughly 0.5 miles north-east. Well-known places in the area include Penwortham Castle (4.4 miles north) and British Commercial Vehicle Museum (within half a mile east). Not far away are Healey Nab.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Common problems we fix in Leyland
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Contact us if you’ve noticed:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Wear marks under the taps
- Staining under the taps and around the waste
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- How soon you can use it again
- How long the guarantee is and what it covers
Also in Leyland
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Leyland. What changes the price is:
- Where the damage is and how we get to it
- The material
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before booking.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- One picture of the entire bath
- Something in shot to show the size
- Natural light rather than flash
- One sharp close-up of the damage
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
