Lancashire · England
Bath Re-enamelling in Andertons Mill
We travel to Andertons Mill for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- A roll-top that is seen better days
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Bath re-enamelling in Andertons Mill without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our technicians work on pressed steel baths, Victorian roll-tops and acrylic baths, and the jobs we see most are a peeling or bubbling previous coating and brown or grey marks that don’t clean off.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Andertons Mill (L40, PR7)
- Area hub
- Lancashire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Why book with us
- One visit for most repairs
- A fixed quote before you book
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
Take a look at our prices page and guide to resurfacing and replacement costs.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Andertons Mill and nearby
Andertons Mill is about 4 miles north-west of Standish, in Lancashire. Across the L40 area, we carry out the work at your property. We cover all 482 towns and villages in Lancashire. Our nearest city page is Liverpool, about 17 miles away.
Here we cover the L40 and PR7 postcode area. From Bentley Lane and Sanderson Lane or a nearby road, a technician can come to you. If you are just outside Andertons Mill, we cover Towngate (1 mile north-west), Heskin (1 mile north), Heskin Green (1 mile north-east), Wrightington Bar (1 mile east) and Mawdesley (1 mile west). Further out, we also cover Preston (10 miles north), Chorley (5 miles north-east), Lytham St Anne's (14 miles north-west), Bamber Bridge (8 miles north), Leyland (5 miles north) and Fulwood (11 miles north).
Local landmarks in Andertons Mill
Our customers here include homes close to St Peter and Paul Catholic Primary School and St James' Church and the streets around them. For rail, the closest station is Parbold station, about 2.6 miles south-west of the centre. Other landmarks nearby include Wrightington Hospital (2.4 miles south-east). The countryside around Andertons Mill includes Mere Sands Wood.
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a full day. Before we go, we’ll explain how long to leave it and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Make sure the area is dry
- Keep pets and children out of the room while we work
- Clear the area around the damage
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
Towns and villages near Andertons Mill
More services for Andertons Mill
What affects the price in Andertons Mill
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Access to the area
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The material and finish
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from pictures
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Natural light rather than flash
- Details of any past repairs
Upload pictures of the damage and one of the whole item, with your L40 postcode, and we’ll come back with a fixed quote.
Aftercare tips
To keep it looking its best for years:
- Do not leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Landlords, agents and businesses in Andertons Mill
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
FAQs for Andertons Mill
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you come to Andertons Mill?
Yes. We work across the UK and come to Andertons Mill. Send us pictures for a fixed quote, or call 0345 017 0787.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.
Do you cover the whole of Lancashire?
All of Lancashire, and the rest of the UK. Travel is included in the price.
How much does bath re-enamelling cost in Andertons Mill?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item with your L40 postcode.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Andertons Mill
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
