Lancashire · England
Bath Re-enamelling for Lytham St Anne's homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Lytham St Anne's. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
Repairing versus replacing in Lytham St Anne's
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why us?
- Free fixed quotes from pictures
- Colour-matched on site
- One visit for most repairs
- Rooms protected and left tidy
Read our full price list or resurfacing vs replacement cost guide.
Bath re-enamelling in Lytham St Anne's without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on acrylic baths, basins & shower trays and cast iron baths, and people most frequently call us about a coating lifting around the plughole and an outdated colour you’d like to change.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Lytham St Anne's (FY8)
- Region
- Lancashire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Lytham St Anne's and the surrounding area
Lytham St Anne's is about 24 miles north of Liverpool, in Lancashire. From the centre of Lytham St Anne's to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Lytham St Anne's is one of 482 towns and villages in Lancashire where we work. We work right across the region, from Lytham St Anne's to Liverpool (24 miles away).
Postcode districts we cover here: FY8. That includes homes on Church Road, St George's Square and Back St George's Square and the roads around them. You will find Lytham St Anne's on the A584 and B5233, so it’s easy for us to reach. We also travel to Fairhaven (1 mile south), St Annes (1 mile west), Squires Gate (2 miles north), Starr Gate (3 miles north-west) and Marton (3 miles north). We also work in nearby towns such as Preston (13 miles east), Bamber Bridge (14 miles east), Leyland (13 miles east), Fulwood (12 miles east), Fleetwood (11 miles north) and Ormskirk (14 miles south). Lytham St Anne's is among the bigger towns we cover in Lancashire.
Around Lytham St Anne's
Locally, our jobs take us to homes close to The Blossoms pub, Lowther Gardens and King Edward VII and Queen Mary School, among other places. Other local landmarks include Clifton Primary School (under half a mile east), St Anne's Church (0.7 miles north-west) and Lytham St. Annes High Technology College (0.5 miles south-east). The closest station to Lytham St Anne's is Ansdell & Fairhaven station, about 0.9 miles south-east of the centre. A little further out are Clifton Hospital (0.5 miles south) and Lytham Windmill Heritage Museum (2.2 miles south-east). The countryside around Lytham St Anne's includes Marton Mere.
Nearby places to Lytham St Anne's
Other services in Lytham St Anne's
When to call us in Lytham St Anne's
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
These are the problems we are asked about most:
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- Wear marks under the taps
- Lots of chips and rust spots
Questions to ask before you book
- The length of the guarantee and what it covers
- What prep work is covered
- Whether the price is fixed and includes VAT
- What happens if they find more damage
How to look after the repair
After the repair has cured, a few habits help it last:
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Don’t use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Landlord and trade work in Lytham St Anne's
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Lytham St Anne's, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
FAQs for Lytham St Anne's
Do you work in Lytham St Anne's?
Yes. We work across the UK and come to Lytham St Anne's. Send us photos for a fixed quote, or call 0345 017 0787.
How do I get a price for bath re-enamelling in Lytham St Anne's?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your FY8 postcode.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Is there a call-out fee?
We do not add a call-out fee. The fixed price covers the visit and the work.
How long does re-enamelling take?
Normally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow most of the day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
